Obtaining a highly synergistic strength and elongation in cast magnesium (Mg) alloys at low
cost is a chronic problem. A series of low-cost and high strength cast Mg–7Zn-xAl-0.3 Mn (x …

Developing high yield strength and ductility in low–cost Mg alloys using conventional plastic
forming process is a tremendous challenge. Mg–Mn–based alloys have drawn considerable …

The Sr-containing magnesium alloys have unique characteristics and demonstrate
potentials to broaden the application of magnesium alloys. The microstructures and room …

Abstract Ca single or Ca–Ce double microalloying Mg–Zn alloy was cast and extruded in the
present study. The combined addition of Ca and Ce improved the mechanical properties of …

In this paper, the microstructural evolution, grain refinement and mechanical properties of as-
cast Mg-6Zn-0.4 Zr alloys with varying Sm contents (0, 2 wt.%, 4 wt.% and 6 wt.%) were …

To improve the comprehensive mechanical properties of Mg-10Zn-5Al-0.1 Sb magnesium
alloy, different amount of Ce-rich rare earth (RE) was added to the alloy, and the effect of RE …

The microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al-xCu
(x= 0, 0.5, 1.0 and 1.5 wt%) alloys were investigated in this work. The results show that the …

High performance Mg–6Al–3Sn–0.25 Mn–x Zn alloys (x= 0, 0.5, 1.0, 1.5, and 2.0 wt%)
without rare earth were designed. The effects of different Zn contents on the microstructure …

At present, the mechanical properties of the Mg–3Sn–2Ca magnesium alloy are not
satisfying and further enhance needs to be considered via further alloying/microalloying …

To investigate the effect of Al 8 Mn 4 Gd phase on microstructural and mechanical properties
of Mg–Al–Ca magnesium alloy, two Mg–2.5 Al 2 Ca and Mg–2.5 Al 2 Ca-0.1 Al 8 Mn 4 Gd …