Calcium (Ca), with abundant and cheap reserves, is a potential element to facilitate the
further application of Mg-Al-Sn based alloys. Here, effects of Ca content on the …

Abstract Effects of Al addition (0.0, 0.5, 3.0, 7.2 wt%) on microstructure, texture and
mechanical properties of Mg-3.5 Ca based alloys were investigated. Our results revealed …

Due to the lack of secondary phases, low-alloyed Mg–Al series alloys usually exhibit low
strength. In this work, by the addition of Ca element, a microstructure consists of a large …

The microstructure and compressive behavior of untreated and solid-solution-treated Mg-1.5
Sn alloys combined with 0.65 at.% Ca or 0.65 at.% Ca+ 0.24 at.% Ag addition were …

The effects of Mn content on the microstructure and mechanical properties of the extruded
Mg-3Sn-xMn (x= 0, 0.5, 1.5, 2.5) alloys was systematically investigated in this study. More …

This work explores trace addition of Li on the magnesium alloy Mg–5Sn, with an emphasis
laid on the microstructure, mechanical properties and fracture mechanism. The results …

In this study, Mg-1.5 Al-xwt% La-Mn (ALaM-x)(x= 0.5, 1, and 2) alloys were prepared by
melting and casting followed by hot extrusion at 300 C. The microstructure evolution and …

High performance Mg–6Al–3Sn–0.25 Mn–x Zn alloys (x= 0, 0.5, 1.0, 1.5, and 2.0 wt%)
without rare earth were designed. The effects of different Zn contents on the microstructure …

Abstracts Achieving high strength and high ductility simultaneously is challenging, limiting
the industrial application of Mg alloys. However, effective approaches such as grain …

There is considerable demand for high-performance, low-cost, and rare-earth-free
magnesium alloys in several industrial applications because of their energy conservation …