The multi-pass caliber rolling was applied to in-situ AlN/AZ91 composite rods, and the yield
strength of 295.3 MPa, ultimate tensile strength of 384.7 MPa, fracture elongation of 12.3 …

The strength of conventional AZ91-based composites can be usually improved by the
extrusion process, however the inadequate ductility is often induced, which limits the …

Due to the low ductility and poor formability, few studies were reported about the rolling
behavior of magnesium matrix composites. In this study, in-situ AlN/AZ91 composite sheets …

The microstructures of as-cast AlN/AZ91 composites prepared by different in-situ nitridation
reaction times are characterized. Increasing nitridation reaction times resulted in …

Age hardening is often used to optimize the mechanical properties of as-deformed Mg-
based materials in industry, whereas the improvement of strength is usually accompanied by …

Based on the in-situ synthesis process, this study proposes a novel process that introduces
lithium salt-modified La 2 O 3p as a precursor into Mg–Li–Al–Zn (LAZ) alloy melt, achieving …

Abstract Nano-, submicron-and micron-sized AlN particles were in situ synthesized in AZ91
matrix alloy by liquid nitriding method. According to thermodynamics calculation and …

To improve metallurgical bonding and texture regulations and grain refinements of Al/Mg
bimetallic composite rods, Al/Mg bimetallic composite rods have been prepared by direct …

Abstract Fabrication and processing of 99.7% purity aluminum powder reinforced with 0, 5,
10% volume fractions NiAl intermetallic metal matrix composites were conducted. The …

An Al 6061/Mg AZ31B composite plate with good bonding and excellent comprehensive
mechanical properties was prepared through solid-liquid cast-rolling bonding (SLCRB). The …