Corrosion Behavior of Nacre-Inspired (TiBw-TiB2)/Al Composites Fabricated by Freeze Casting
J Zhang, M Qian, R Yang, F Yu, X Zhang, Z Jia, A Li… - Materials, 2024 - mdpi.com
Nacre-inspired metal matrix composites have received much attention due to their excellent
deformation coordination ability, which can achieve the synergy of strength and ductility. The …
deformation coordination ability, which can achieve the synergy of strength and ductility. The …
Corrosion behavior of in-situ TiB2/7050Al composite in NaCl solution at different pH values
J Huang, D Chen, Y Wu, M Wang, C Xia… - Materials Research …, 2019 - iopscience.iop.org
The polarization curve, electrochemical impedance spectroscopy (EIS) and static immersion
test, combined with the microstructure characterizations, were applied to study corrosion …
test, combined with the microstructure characterizations, were applied to study corrosion …
Improved hot corrosion resistance of TiBw/TA15 composite via pack cementation aluminide coating
Q Kang, X Xu, G Wang, Y Chen, S Luo - Corrosion Science, 2022 - Elsevier
An aluminide coating was prepared on the TiB w/TA15 composite by pack cementation to
improve the hot corrosion resistance. After 100 h test, the mass gain for uncoated and …
improve the hot corrosion resistance. After 100 h test, the mass gain for uncoated and …
Optimization of the microstructure, mechanical properties, and wear resistance of nacre-inspired TiB2/Al-Cu composites via gelatin addition
Y Chen, B Lin, M Nie, K Hu, H Xiao - Journal of Central South University, 2024 - Springer
Abstract Nacre-inspired TiB2/Al-Cu composites were prepared by freeze casting and
squeeze casting. This study focused on the effect of gelatin content on microstructure …
squeeze casting. This study focused on the effect of gelatin content on microstructure …
Corrosion and wear properties of in situ (TiB+ TiC)/TA15 composites with a high volume percentage of reinforcement
W Wang, K Shi, J Zhao, S Liu, J Cheng, W Qiu, T Liu… - China Foundry, 2023 - Springer
Abstract The in situ (TiC+ TiB)/TA15 composites with different volume percentages of
reinforcement (10%, 15%, 20% and 25%) were prepared by water-cooled copper crucible …
reinforcement (10%, 15%, 20% and 25%) were prepared by water-cooled copper crucible …
High damage-tolerance nacre-inspired TiB2/Al-Cu composites with adjustable mechanical performance based on heat-treatment condition tuning
H Xiangxiang, L Bo, Z Wenxin, X Huaqiang - Materials Characterization, 2023 - Elsevier
High damage-tolerance nacre-inspired TiB 2/Al-Cu composites are successfully prepared by
freeze casting and pressure infiltration. The obtained composites have a great application …
freeze casting and pressure infiltration. The obtained composites have a great application …
[HTML][HTML] Nacre-inspired Ti (C, N)/Al–Cu composites with high damage tolerance and wear resistance prepared by freeze and squeeze casting
N Meng, L Bo, C Yali, X Huaqiang - Journal of Materials Research and …, 2023 - Elsevier
Freeze casting is an attractive method for designing lamellar ceramic-aluminum composites
with a unique combination of strength and toughness. However, there are few studies on the …
with a unique combination of strength and toughness. However, there are few studies on the …
Investigation on the microstructure and electrochemical corrosion properties of TiB2 reinforced aluminum matrix composites
X Meng, J Guan, Q Liu, P Liang, Y Wang - International Journal of …, 2022 - Elsevier
The TiB 2 particles reinforced AlSi10Mg composites were prepared by selective laser
melting (SLM). The effect of TiB 2 particles on the microstructure and electrochemical …
melting (SLM). The effect of TiB 2 particles on the microstructure and electrochemical …
[HTML][HTML] Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling
J Nie, F Wang, Y Chen, Q Mao, H Yang, Z Song, X Liu… - Results in Physics, 2019 - Elsevier
The microstructure and corrosion behavior of Al-5 wt.% TiB 2/TiC composites after hot rolling
treatment were investigated by scanning electron microscope, immersion tests …
treatment were investigated by scanning electron microscope, immersion tests …
Microstructures and mechanical properties of high-performance nacre-inspired Al-Si/TiB2 composites prepared by freeze casting and pressure infiltration
W Zhang, B Lin, Y Tang, Y Wang, D Zhang… - Ceramics …, 2021 - Elsevier
Abstract The nacre-inspired Al-Si/TiB 2 composites were successfully prepared by freeze
casting and pressure infiltration. The microstructures and mechanical properties of nacre …
casting and pressure infiltration. The microstructures and mechanical properties of nacre …