This study reports that solid-state reactions occur by the application of high-pressure torsion
(HPT) to the Al–Cu system even at low homologous temperature. A bulk form of disc …

Disks of commercial Al-1050 and ZK60A alloys were stacked together and then processed
by conventional high-pressure torsion (HPT) through 1 and 5 turns at room temperature to …

The method utilizing high-pressure torsion (HPT) processing followed by annealing to
fabricate Cu-Al in situ composite with enhanced mechanical properties is presented. The …

This report summarizes a recent study demonstrating simple and rapid synthesis of a new Al–
Mg alloy system and ultimately synthesizing a metal matrix nanocomposite, which was …

This report presents an overview of recent studies demonstrating a bulk-state reaction
involving mechanical bonding through the application of high-pressure torsion (HPT) …

High‐pressure torsion (HPT) is used to investigate the formation of a new metal system by
the direct bonding of separate disks of Al and Cu by processing at room temperature under a …

The processing of metals through the application of high-pressure torsion (HPT) provides
the potential for achieving exceptional grain refinement in bulk metals. Numerous reports …

Pure Al (99.99%) was processed using high-pressure torsion (HPT), and Vickers
microhardness was measured along the diameter of the disk samples. When all hardness …

A Cu–Fe (10vol.%) composite material was fabricated by the cold drawing process and then
processed by high-pressure torsion (HPT). The resulting nanostructure was investigated by …

Experiments were conducted on an Al–3wt.% Mg–0.2 wt.% Sc alloy and pure Cu to evaluate
the effect of high-pressure torsion (HPT). The results show that very substantial grain …