Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding
A Abdollahzadeh, B Bagheri… - Materials and …, 2023 - Taylor & Francis
ABSTRACT A joint of aluminum to copper sheets with a nanoparticle interlayer was
successfully achieved by friction stir spot welding (FSSW). Effects of SiC reinforcing particles …
successfully achieved by friction stir spot welding (FSSW). Effects of SiC reinforcing particles …
Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy
FB Argesi, A Shamsipur, SE Mirsalehi - Transactions of Nonferrous Metals …, 2021 - Elsevier
Butt friction stir welding between pure copper and AA5754 alloy was carried out. Reinforcing
SiC nano-particles were utilized in friction stir welded (FSW) joints to decline the harmful …
SiC nano-particles were utilized in friction stir welded (FSW) joints to decline the harmful …
The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding
B Bagheri, M Alizadeh, SE Mirsalehi, A Shamsipur… - Welding in the …, 2022 - Springer
Friction stir spot welding (FSSW) was implemented to joining of AA2024-T4 and
commercially pure copper with SiC nanoparticles as a reinforcing particle with different …
commercially pure copper with SiC nanoparticles as a reinforcing particle with different …
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al–Cu joints
P Xue, DR Ni, D Wang, BL Xiao, ZY Ma - Materials science and …, 2011 - Elsevier
Butt joints of 1060 aluminum alloy and commercially pure copper were produced by friction
stir welding (FSW) and the effect of welding parameters on surface morphology, interface …
stir welding (FSW) and the effect of welding parameters on surface morphology, interface …
Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds
P Xue, BL Xiao, DR Ni, ZY Ma - Materials science and engineering: A, 2010 - Elsevier
Aluminum and copper plates were successfully friction stir welded by offsetting the tool to the
aluminum side, producing excellent metallurgical bonding on the Al–Cu interface with the …
aluminum side, producing excellent metallurgical bonding on the Al–Cu interface with the …
Nanoparticles addition in AA2024 aluminum/pure copper plate: FSSW approach, microstructure evolution, texture study, and mechanical properties
B Bagheri, M Alizadeh, SE Mirsalehi, A Shamsipur… - Jom, 2022 - Springer
Due to the high application of dissimilar Al-Cu joints in different industries, pure copper and
the AA2024 alloy with SiC nanoparticles were successfully welded by friction stir spot …
the AA2024 alloy with SiC nanoparticles were successfully welded by friction stir spot …
Evolution of the microstructure and strength in the nugget zone of friction stir welded SiCp/Al–Cu–Mg composite
D Wang, BL Xiao, QZ Wang, ZY Ma - Journal of Materials Science & …, 2014 - Elsevier
A 6 mm-thick SiCp/2009Al composite plate was successfully joined by friction stir welding
(FSW) using an ultra-hard material tool to investigate the evolution of the microstructure and …
(FSW) using an ultra-hard material tool to investigate the evolution of the microstructure and …
A different attempt to analysis friction stir spot welding of AA5083-copper alloys
B Bagheri, A Abdollahzadeh… - Materials Science and …, 2023 - journals.sagepub.com
A study has been made on the possibility of friction stir spot welding (FSSW) of the
aluminium to copper sheet with SiC nanoparticles. Modified microstructures with different …
aluminium to copper sheet with SiC nanoparticles. Modified microstructures with different …
Achievement of high-strength Al/Cu dissimilar joint during submerged friction stir welding and its regulation mechanism of intermetallic compounds layer
Y Mao, D Qin, X Xiao, X Wang, L Fu - Materials Science and Engineering: A, 2023 - Elsevier
The control of intermetallic compounds (IMCs) is the key to achieve high-performance Al/Cu
dissimilar joints. In the present study, the dissimilar metals of 6061-T6 Al and T2 pure Cu …
dissimilar joints. In the present study, the dissimilar metals of 6061-T6 Al and T2 pure Cu …
Investigation of SiC nanoparticle size and distribution effects on microstructure and mechanical properties of Al/SiC/Cu composite during the FSSW process …
B Bagheri, A Shamsipur, A Abdollahzadeh… - Metals and Materials …, 2023 - Springer
In this work, aluminum-copper composites reinforced with 50 nm and 250 nm SiC particles
are fabricated on the interface of sheets by friction stir spot welding for the first time. In …
are fabricated on the interface of sheets by friction stir spot welding for the first time. In …