The detection of partial discharge (PD) activities in high-voltage equipment can be
conducted according to several mechanisms of signal detection, including electromagnetic …

Partial discharges (PD) measurement provides valuable information for the condition
assessment of the insulation status of high-voltage (HV) electrical installations. During the …

When operating an equipment or a power system at the high voltage, problems associated
with partial discharge (PD) can be tracked down to electromagnetic emission, acoustic …

The ultra high frequency (UHF) electromagnetic wave detection method has been widely
studied and used in partial discharge (PD) measurement and as a diagnostic technique for …

Ultra high frequency (UHF) partial discharge detection is a common on-site insulation
diagnosis technique for gas-insulated switchgear (GIS) that has increasingly acquired …

Gas insulated switchgears (GIS) have been increasingly introduced as main substation
equipment since the late 1960s thanks to their high reliability, safety, and compactness. The …

On-line partial discharge (PD) monitoring has proved to he a fast, convenient, reliable and
cost-effective tool in determining numerous areas of insulation deterioration within medium …

Partial discharge (PD) measurement is performed as one of diagnostic tool for condition
monitoring in cubicle-type gas insulated switchgear (C-GIS). This paper presents artificial …

There is a high risk of insulation system dielectric instability when partial discharge (PD)
occurs. Therefore, measurement and monitoring of PD is an important preventive tool to …

UHF partial discharge detection in gas-insulated switchgear (GIS) has advantages over the
conventional method. For example, UHF PD detection allows the suppression of high …