Given the limitations of the phase diagram method and the blindness of the trial-and-error
method in the composition design of multi-element Mg alloys, the design of multi-element …

Achieving high strength in Mg alloys is usually accompanied by ductility loss. Here, a novel
Mg 97 Y 1 Zn 1 Ho 1 at.% alloy with a yield strength of 403 MPa and an elongation of 10% is …

Grain boundary strengthening is an effective strategy for increasing mechanical properties of
Mg alloys. However, this method offers limited strengthening in bimodal grain-structured Mg …

In this study, we successfully developed a low RE containing Mg-3Y-2Gd-1Nd-0.5 Zr (wt%)
alloy with high strength-ductility synergy by combined processes of hot extrusion, hot rolling …

Currently, the hierarchical structure is one of the most effective means to enhance the
strength and plasticity of metal materials, since the strain localization can be effectively …

Developing high yield strength and ductility in low–cost Mg alloys using conventional plastic
forming process is a tremendous challenge. Mg–Mn–based alloys have drawn considerable …

Ternary magnesium-based alloys with an aluminum content of 0.5 wt.% and a varying
manganese content of x= 1, 2, and 3 wt.%(Mg-xMn-0.5 Al) were prepared and characterized …

Owing to the low alloying content in commercial wrought Mg alloys, their strengthening
potential is greatly suppressed. It is difficult to achieve the synergy of high strength and …

Enhancing the strength and ductility of widely used Mg–Al–Zn alloys is an urgent
requirement for Mg alloy load-bearing components. Ultra-fine grains and a large amount of β …

The present study focused on the development of magnesium-based medium entropy alloy
(Mg MEA). The multicomponent alloy with a composition, Mg 62 Li 13 Zn 12 Cu 10 Y 3 …