In this paper, 7055 Al composites reinforced by Al 2 O 3 and ZrB 2 nanoparticles were
fabricated by in-situ reaction. The adhesion (Wad) of the ZrB 2/Al interface was 3.91 J/m 2 …

In this study, to achieve high strength, high ductility and good creep resistance, in-situ Al 2 O
3 and ZrB 2 nanoparticles were introduced into 7055 aluminum alloy subjected to the …

In this paper, the AA6111 matrix composites reinforced by in-situ ZrB 2 nanoparticles were
fabricated via an Al-Zr-B reaction system and their creep behavior at high temperature was …

In this paper, the in-situ (ZrB 2+ Al 2 O 3)/7N01Al nanocomposite was manufactured by in-
situ Al-Zr-BO reaction system and hot rolling. The microstructure indicated that the grain size …

Abstract An (α–Al 2 O 3+ ZrB 2)/Al composite has been prepared in this work by promoting
the reactions among Al, ZrO 2 and B 2 O 3 powders. The in–situ formed α–Al 2 O 3 particles …

In this study, the ZrB 2/Al nanocomposites were fabricated via in-situ reaction of the Al-K 2
ZrF 6-KBF 4 system, assisted with ultrasonic vibration and spiral electromagnetic stirring …

A commercial gas-atomized aluminum powder was mechanically milled in a planetary ball
mill under an argon atmosphere for 12h to produce alumina dispersion strengthened …

To synthesize Al composite with high strength at elevated temperature, high modulus and
thermal stability, ZrB2, Al3BC and Al2O3 particles have been chosen as reinforcements …

Tensile creep tests were carried out at 573, 623 and 673 K on in-situ formed Al2O3 and TiB2
particulates mixture-reinforced aluminum (Al–Al2O3. TiB2) composites fabricated from TiO2 …

In this study, aluminium metal composites reinforced with Zirconium dioxide (ZrO 2) nano-
particles in different of volume percentage are manufactured through accumulative roll …