The microstructure and electrochemical behavior of Mg–6Al–1Zn, Mg–6Al–1Zn–1Ga, Mg–
6Al–1Zn–1Sn, and Mg–6Al–1Zn–0.5 Sn–0.5 Ga as anode materials in a 3.5 wt% NaCl …

The microstructure and electrochemical behaviors of Mg-Al-Zn and Mg-Al-Zn-Ga alloys as
anode materials were investigated by morphology observation, composition analysis, phase …

A series of Mg2− xNdxNi (x= 0.05, 0.1, 0.2, 0.3) and Mg1. 95RE0. 05Ni (RE= La, Ce, Pr, Nd,
Y) ternary alloys were prepared by ball milling of mixed powder of Mg, Ni, RE and sintering …

Abstract In this study, Mg-6% Al-1% Sn-1% In (wt%) alloy is fabricated with the conventional
casting method. Then an alloy sheet with a thickness of 2 mm is obtained by hot extrusion …

Abstract The Mg-Ni-based alloys have been extensively investigated as negative electrode
materials in Nickel-Metal Hydride (Ni-MH) batteries. In this work, two Mg-Ni-based samples …

To improve the corrosion behavior and discharge performance of Mg–1Sn‐based Mg–air
battery anodes, Zn/Ca alloying elements are added in the alloys to modify the type and …

In this study, the electrochemical behavior of Mg–9Al–0.5 Zn, Mg–9Al–0.7 Zn, and Mg–9Al–
1.0 Zn electrodes in a 0.7 mol L− 1 NaCl solution is evaluated by using potentiodynamic …

Abstract Three types of Mg–Al-based anodes Mg–3Al–Zn, Mg–6Al–Zn, and Mg–6Al–Sn
(wt.%) alloys were produced. The influences of Al and Sn on microstructure, corrosion …

Abstract Mg–6Al-0.5 Er and Mg–6Al alloys were prepared by the casting and hot extruding.
Microstructure and electrochemical performance of the alloys were systematically …

The microstructures and electrochemical behavior of Mg-Al-Zn-In-Ga alloys are investigated
by scanning electron microscopy (SEM), X-ray diffraction (XRD), galvanostatic oxidation …