Excellent ductility and high strength were achieved in the Mg-10.6 Gd-2Ag (wt.%) alloy via
an industrial-scale equal channel angular pressing (ECAP). The ECAP alloy exhibits an …

In this work, a high-strength Mg–10Gd–6Y–1.5 Zn–0.5 Zr (wt.%) alloy was fabricated by
successive multi-pass equal channel angular pressing (ECAP). The microstructure and …

Abstract An extruded Mg− 6Gd− 3Y− 1.5 Ag (wt%) alloy was processed by 6 passes of equal
channel angular pressing (ECAP) at 553 K using route Bc to refine the microstructure …

To simultaneously improve the strength and ductility of the Mg-10Gd-3Y alloy, we propose a
new processing route: conventional extrusion (EX), followed by an equal channel angular …

Abstract Mg–Gd–Ag-based alloys have attracted considerable attention in recent years
owing to their high strength. However, their characteristic mechanical behavior remains …

It is challenging to develop Mg alloys with high strength-ductility synergy and isotropic
mechanical properties. An industrial-scale ultrafine-grained (UFG) Mg-10.6 Gd-2Ag wt …

An ultrafine-grained (UFG) Mg–5.12 wt.% Zn–0.32 wt.% Ca alloy with an average grain size
of 0.7 μm was produced by subjecting the as-extruded alloy to equal channel angular …

Microstructure, mechanical properties and superplastic behavior of Mg–2Gd–xZn (x= 0, 1, 2
and 3 wt%) alloys were investigated after extrusion and equal channel angular pressing …

After sixteen successive passes of equal channel angular pressing (ECAP), kinked 18R-
LPSO phase and refined DRX grains were developed in Mg 94 Y 4 Zn 2 alloy …

In this work, two wrought Mg-3.66 Al-4.25 Ca-0.43 Mn (wt%) alloys with different morphology
and distribution of Mg 2 Ca particles were fabricated by hot extrusion and multi-pass (32) …