Two different types of shear bands generate in ultrafine-grained (UFG) CoCrFeMnNi high-
entropy alloys deformed at 77 K, ie commonly-observed low angle grain boundary (LAGB) …

Fully recrystallized CoCrFeMnNi high entropy alloys (HEAs) with different grain sizes
ranging from 503 nm to 88.9 µm were fabricated by cold rolling and controlled annealing …

Abstract Substitution of Ge for Mn increases the elastic moduli of different {hkl} orientations
of the CoCrFeMnNi-based high-entropy alloy. Our findings indicate that tuning minor …

The mechanical response of a Co 11.3 Cr 20.4 Fe 22.6 Mn 21.8 Ni 23.9 (wt%) high entropy
alloy with a segmented coarse grain structure is investigated using strain-rate-dependent …

The present study investigated the effects of cold drawing deformation on the microstructure
and mechanical properties of CoCrFeMnNi high entropy alloy. The results showed that at …

The cryogenic plastic deformation of CrCoFeMnNi high entropy alloy is characterized by
three distinct stages based on the change of the work hardening rate. Microstructure and …

High-entropy alloys (HEAs) fabricated by powder metallurgy are considered to exhibit
extremely-great potential application values in the field for high-speed impact deformation …

The effect of strain path on microstructure and texture formation in an equiatomic
CoCrFeMnNi high entropy alloy was investigated. For this purpose, the alloy was cold-rolled …

An equiatomic high entropy CoCrFeMnNi alloy has been processed by caliber rolling and its
microstructure studied by transmission electron microscopy (TEM). The cast dendritic …

Tensile properties of an as-cast CoCrFeMnNi high-entropy alloy were investigated at
various temperatures ranging from− 160 to 1000° C. The tensile strength and ductility did not …