The subgrain segregation of Inconel 625 components fabricated using high-efficiency wire
laser additive manufacturing and its effect on the intergranular corrosion characteristics were …

The microstructures and corrosion resistances of Inconel 718 alloy prepared by selective
laser melting (SLM), SLM following various heat treatments, and conventional rolling are …

In this work, Inconel 718 alloys with different TiC contents were fabricated one time
successfully by a joint powder-fed laser metal deposition (LMD) system with two …

The intergranular corrosion (IGC) resistance of Inconel 625 produced by laser powder bed
fusion was investigated according to ASTM-G28 method A. Unexpected severe corrosion …

In this study, the effect of Al addition on the microstructure and microhardness of Inconel 718
superalloy fabricated by laser additive manufacturing (LAM) was studied. The addition of Al …

Conventional grain-boundary engineering (GBE) is not directly compatible with the
complicated geometric parts fabricated via laser powder bed fusion (LPBF) owing to the …

In this study, the effect of rhenium addition (2, 4, and 6 wt pct) and building orientation (0 and
90 deg) on the microstructure and corrosion resistance of Inconel 718 (IN718) alloy …

Inconel 625 superalloy samples were fabricated using wire arc additive manufacturing
(WAAM). The phase composition, microstructure, anti-corrosion, and mechanical properties …

The base cooling effect was improved by imposing the continuous water flow on the back of
the substrate during the laser additive manufacturing of Inconel 718 (IN718). The dendritic …

Circular oscillating laser was used as a heat source for additive manufacturing to fabricate
Inconel 625 alloy. This study focused on the influences of the circular beam oscillation on …