Magnesium (Mg) alloys are known to exhibit strong basal texture following large plastic
deformation. However, recent experimental studies have revealed that the Mg-Y-Nd-Zr-Gd …

Single-phase solid solution alloys, Mg-2.9 Y and Mg-2.9 Zn (in wt%), and two-phase (α-Mg
solid solution+ intermetallic) Mg-Zn-Y alloys were selected using the CALPHAD (Calculation …

One of the main material properties altered by rare earth additions in magnesium alloys is
texture, which can be specifically adjusted to enhance ductility and formability. The current …

The recrystallization and texture evolution of four Mg–Zn–Ce sheets with a warm-rolled
microstructure obtained through two stages that can be characterised as rough rolling and …

In this paper, effects of thermal mechanical parameters on the flow behaviors and
microstructure evolution of Mg-7.5 Gd-1.5 Y-0.4 Zr-0.5 Ag (wt%) alloy were analyzed by the …

Hot deformation with high strain rate has been paid more attention due to its high efficiency
and low cost, however, the strain rate dependent dynamic recrystallization (DRX) and …

Recently, there is a strong demand for light-weight alloys due to the social needs for energy-
saving and environmentally friendly materials. From this point of view, magnesium alloy is …

Pure magnesium and three binary Mg–Y alloys (0.23, 0.84 and 2.71 wt% Y) have been
deformed in plane strain compression under conditions where dynamic recrystallization …

We utilized electron backscatter diffraction to investigate the microstructure evolutions of a
newly developed magnesium-rare earth alloy (Mg–9.80 Gd–3.78 Y–1.12 Sm–0.48 Zr) …

The trace addition of rare earth (RE) elements in Mg alloys can modify the extrusion texture,
leading to the formation of RE texture and thus improved formability. The interrupted …