Aluminum matrix composites (AMCs) reinforced with various ceramic particles suffer a loss
in ductility. Hard metallic particles can be used as reinforcement to improve ductility. The …

The reinforcement of ceramic particles in aluminum matrix composites (AMCs) restricts the
plastic flow of the matrix and causes a loss in ductility. The reported research work …

Aluminum matrix composites (AMCs) reinforced with various ceramic particles usually
exhibit poor ductility. One solution to increase ductility is the usage of hard metallic or alloy …

Tungsten particles were incorporated into an Al 5083 matrix by friction stir processing (FSP).
FSP resulted in uniform dispersion of the tungsten particles with excellent interfacial bonding …

Conventional ceramic particulate reinforcements cause a major loss in ductility of
magnesium matrix composites (MMCs). Metallic particles possessing higher melting point …

In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum
metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced …

Nickel particles were embedded into an Al matrix by friction stir processing (FSP) to produce
metal particle reinforced composite. FSP resulted in uniform dispersion of nickel particles …

Nowadays, fabrication of metal matrix composites (MMCs) with high mechanical properties
and modified microstructures has attracted many attentions. One of the methods to produce …

Friction stir processing (FSP) has emerged as an effective secondary processing technique
to improve the microstructure and properties of aluminum matrix composites (AMCs). Al/(0 …

Friction stir processing (FSP) is used as a secondary processing technique that has been
employed to enhance the microstructure and other attributes of aluminum matrix composites …