Electro-optic modulation has been demonstrated using single crystal film of an organic
electro-optic material,[N-(4-nitrophenyl)-L-prolinol](NPP), placed in a Fabry–Perot cavity …

Electro-optic modulation using single-crystal film of an organic molecular salt placed in a
Fabry-Perot cavity has been measured at 633 and 750 nm⁠. Large modulation depth (80%) …

Electro-optic modulation using single-crystal film of an organic molecular salt with light
propagating perpendicular to the film (transverse configuration) has been recently reported …

The electro-optic properties of polymeric materials are characterized using Fabry-Perot
etalons in which the polymeric layer acts as the spacer layer. This technique is particularly …

Energy-efficient electro-optic modulators are at the heart of short-reach optical interconnects,
and silicon photonics is considered the leading technology for realizing such devices …

Organic and polymeric materials have many useful features for thin-film electro-optic
devices. These include low dielectric constants, moderate-to-large electro-optic coefficients …

Fabrication and characterisation of electro-optic Fabry-Pérot modulators containing a poled
crosslinked polymer are described. Electro-optic modulation as large as 38% in reflection …

The selection process leading to the development of a guest–host electro‐optic material
based on an amorphous polycarbonate (APC) is described. The optical loss at 1300 nm of …

Asymmetric Fabry-Perot modulators containing an electrooptic polymeric film are described.
The designs of these structures are optimized for reflection operation by maximizing both …

Light modulation by an electrooptic nonlinear device is examined theoretically and
experimentally. Very low voltage light modulation may be achieved in a conventional …