Experimental studies and the model of anisotropic plasticity for additively manufactured stainless steel with stress state dependent properties
A Fedorenko, B Fedulov, S Evlashin… - Continuum Mechanics …, 2024 - Springer
In this study the mechanical anisotropy of laser powder bed fusion (LPBF) 316L stainless
steel under tensile, compressive, and shear loading in different orientations with respect to …
steel under tensile, compressive, and shear loading in different orientations with respect to …
[HTML][HTML] Microstructural modeling and measurements of anisotropic plasticity in large scale additively manufactured 316L stainless steel
TFW Van Nuland, LP Belotti, JPM Hoefnagels… - European Journal of …, 2022 - Elsevier
In this paper, the wire+ arc additive manufacturing process-induced plastic anisotropy of
316L stainless steel is analyzed by means of detailed 3D microstructural modeling and …
316L stainless steel is analyzed by means of detailed 3D microstructural modeling and …
Elastic properties of additively manufactured steel produced with different scan strategies
O Zinovieva, V Romanova, A Zinoviev… - International Journal of …, 2023 - Elsevier
The current study reports the application of a novel integrated process-structure-property
approach in laser powder bed fusion (LPBF) additive manufacturing of stainless steel …
approach in laser powder bed fusion (LPBF) additive manufacturing of stainless steel …
[HTML][HTML] Mechanical anisotropy of additively manufactured stainless steel 316L: An experimental and numerical study
A Charmi, R Falkenberg, L Ávila, G Mohr… - Materials Science and …, 2021 - Elsevier
The underlying cause of mechanical anisotropy in additively manufactured (AM) parts is not
yet fully understood and has been attributed to several different factors like microstructural …
yet fully understood and has been attributed to several different factors like microstructural …
In-plane anisotropy of selective laser-melted stainless steel: The importance of the rotation angle increment and the limitation window
L Hitzler, J Hirsch, J Tomas, M Merkel… - Proceedings of the …, 2019 - journals.sagepub.com
The thorough description of the influence of the process conduct in powder-bed-based
additive manufacturing on the mechanical properties of the fabricated components …
additive manufacturing on the mechanical properties of the fabricated components …
Orientation and stress state dependent plasticity and damage initiation behavior of stainless steel 304L manufactured by laser powder bed fusion additive …
The plasticity and ductile fracture behavior of stainless steel 304L fabricated by laser powder
bed fusion additive manufacturing was investigated under both uniaxial and multiaxial …
bed fusion additive manufacturing was investigated under both uniaxial and multiaxial …
Mechanical and microstructural anisotropy of laser powder bed fusion 316L stainless steel
Z Pitrmuc, J Šimota, L Beránek, P Mikeš, V Andronov… - Materials, 2022 - mdpi.com
This paper aims at an in-depth and comprehensive analysis of mechanical and
microstructural properties of AISI 316L austenitic stainless steel (W. Nr. 1.4404, CL20ES) …
microstructural properties of AISI 316L austenitic stainless steel (W. Nr. 1.4404, CL20ES) …
Understanding orientation-dependent plasticity in laser beam powder bed fusion stainless steel through crystal plasticity modelling
Single-crystal-like stainless steel 316L (SS316L) was tailored by laser beam powder bed
fusion (PBF-LB). Tensile responses along the< 100>,< 110> and< 111> crystallographic …
fusion (PBF-LB). Tensile responses along the< 100>,< 110> and< 111> crystallographic …
[HTML][HTML] Microstructural modeling of anisotropic plasticity in large scale additively manufactured 316L stainless steel
TFW van Nuland, JAW Van Dommelen… - Mechanics of Materials, 2021 - Elsevier
In this paper, the anisotropic mechanical response triggered by specific microstructures
encountered in wire+ arc additively manufactured 316L stainless steels is analyzed. For this …
encountered in wire+ arc additively manufactured 316L stainless steels is analyzed. For this …
Experimental and Crystal Plasticity Investigation of the Effect of As-Printed Dislocation Densities on the Mechanical Anisotropy of Additive Manufacturing 316l …
MG Elkhateeb, S Dixit, S Liu, PM Smith, G Li - Available at SSRN 4820951 - papers.ssrn.com
Abstract 316L stainless steel (SS) fabricated by laser powder bed fusion (LPBF) displays
significant mechanical anisotropy in strength and ductility. This research finds anisotropy …
significant mechanical anisotropy in strength and ductility. This research finds anisotropy …