Microstructure and tensile properties of a Mg-Sm-Zn-Zr alloy with various extrusion ratios
(ERs) of 6.9, 10.4 and 17.6 were systematically investigated. It was identified that, greater …

Obtaining high strength without sacrificing ductility in Mg alloys is of great importance.
However, the hexagonal close-packed crystal structure critically limits the deformation of Mg …

In this work, the Mg-8.5 Gd-2.5 Y-0.3 Zr (wt.%) and Mg-8.5 Gd-2.5 Y-0.5 Zn-0.3 Zr (wt.%)
alloys were subjected to indirect extrusion. The microstructure and mechanical properties of …

The influence of pre-aging treatment on the microstructure, texture and mechanical
properties of the Mg–6Zn–1Gd–1Er (wt.%) alloy was investigated. The microstructure …

Abstract Effects of Ca content (0.0, 0.5, 1.0, 2.0 wt%) on the microstructure, texture and
mechanical properties of Mg-1.0 Sn-0.5 Zn-based alloys were investigated. The results …

Abstract Mg-1.58 Zn-0.52 Gd (wt.%) alloy was subjected to slow-speed extrusion at 350° C
and 400° C combined with hot pre-forging. The extruded alloy without pre-forging exhibited …

Abstract Mg-2.6 Sm-1.3 Gd-0.6 Zn-0.5 Zr (wt.%) alloy is prepared with metal mold casting
and followed hot extruded at 400° C with the extrusion ratio of 25: 1. Microstructure and …

Abstract The influence of 0.5 and 1.0 wt% Mn addition on the microstructure, texture,
mechanical properties and biodegradability of the extruded Mg–4Zn alloy was investigated …

Abstract Effects of various Sm additions on microstructures and mechanical properties of a
hot-extruded Mg–14Gd− 0.5 Zr alloy were studied in this work. The results indicate that Sm …

The effect of aging prior to extrusion (APE) on the microstructure and mechanical properties
of Mg–7Sn–1Al–1Zn (wt.%) alloy was investigated under various extrusion conditions. The …