[PDF] academia.edu

Enhanced (thermo)mechanical properties in biobased poly(l‐lactide)/poly(amide‐12) blends using high shear extrusion processing without compatibilizers

A Raj, C Samuel, N Malladi… - Polymer Engineering & …, 2020 - Wiley Online Library
Compatible and partly‐biobased poly (l‐lactide)(PLA)/polyamide‐12 (PA12) blends (30 wt%
PA12) are here processed by twin‐screw extrusion at high shear without added …
被引用次数：13 相关文章 所有 6 个版本

Polylactide/poly (ω-hydroxytetradecanoic acid) reactive blending: A green renewable approach to improving polylactide properties

S Spinella, J Cai, C Samuel, J Zhu… - …, 2015 - ACS Publications
A green manufacturing technique, reactive extrusion (REx), was employed to improve the
mechanical properties of polylactide (PLA). To achieve this goal, a fully biosourced PLA …
被引用次数：62 相关文章 所有 6 个版本
[PDF] rsc.org

Development of nanofibrillar morphologies in poly (L-lactide)/poly (amide) blends: Role of the matrix elasticity and identification of the critical shear rate for the nodular …

M Yousfi, T Dadouche, D Chomat, C Samuel… - RSC …, 2018 - pubs.rsc.org
Bio-based poly (L-lactide)/poly (amide-11) blends (PLA/PA11, 80/20 w/w) and poly (L-
lactide)/poly (amide-6) blends (PLA/PA6, 80/20 w/w) are processed by twin-screw extrusion …
被引用次数：38 相关文章 所有 15 个版本
[PDF] mdpi.com

Biosourced Poly (lactic acid)/polyamide-11 Blends: Effect of an Elastomer on the Morphology and Mechanical Properties

A Fazli, D Rodrigue - Molecules, 2022 - mdpi.com
Fully biobased polylactide (PLA)/polyamide-11 (PA11) blends were prepared by melt mixing
with an elastomer intermediate phase to address the low elasticity and brittleness of PLA …
被引用次数：5 相关文章 所有 8 个版本
[PDF] mdpi.com

Rheological, morphological and mechanical studies of sustainably sourced polymer blends based on poly (lactic acid) and polyamide 11

F Walha, K Lamnawar, A Maazouz, M Jaziri - Polymers, 2016 - mdpi.com
The objective of this study was to gain a deep understanding of composition and
compatibilization effects on the properties of entirely sustainably sourced polymer blends …
被引用次数：99 相关文章 所有 13 个版本

Morphology, thermal behavior and mechanical properties of binary blends of compatible biosourced polymers: Polylactide/polyamide11

G Stoclet, R Seguela, JM Lefebvre - Polymer, 2011 - Elsevier
Blends of entirely biosourced polymers, namely polylactide (PLA) and polyamide11 (PA11),
have been melt-compounded by twin-screw extrusion without the use of any compatibilizing …
被引用次数：169 相关文章 所有 10 个版本
[PDF] mdpi.com

PLA/PA bio-blends: Induced morphology by extrusion

V García-Masabet, O Santana Pérez, J Cailloux, T Abt… - Polymers, 2019 - mdpi.com
The effect of processing conditions on the final morphology of Poly (Lactic Acid)(PLA) with
bio-based Polyamide 10.10 (PA) 70/30 blends is analyzed in this paper. Two types of PLA …
被引用次数：24 相关文章 所有 9 个版本
[PDF] academia.edu

Compatibility in biobased poly (L‐lactide)/polyamide binary blends: From melt‐state interfacial tensions to (thermo) mechanical properties

A Raj, K Prashantha, C Samuel - Journal of Applied Polymer …, 2020 - Wiley Online Library
The melt compatibility between poly (L‐lactide)(PLA) and polyamides (PAs) with related
thermomechanical properties is addressed. A particular attention is paid to four commercial …
被引用次数：13 相关文章 所有 6 个版本
[PDF] frontiersin.org

Role of compatibilizer in improving the properties of PLA/PA12 blends

A Raj, C Samuel, K Prashantha - Frontiers in Materials, 2020 - frontiersin.org
Engineering properties of partially-biobased poly (L-Lactide)/poly (amide-12)(PLA/PA12)
blends are here addressed using a functional compatibilizer, namely poly (L-Lactide) grafted …
被引用次数：12 相关文章 所有 5 个版本
[PDF] csir.co.za

A new insight into morphological, thermal, and mechanical properties of melt-processed polylactide/poly (ε-caprolactone) blends

OJ Botlhoko, J Ramontja, SS Ray - Polymer degradation and stability, 2018 - Elsevier
Abstract Biodegradable polylactide (PLA)/poly (ε-caprolactone)(PCL) blend is a well-studied
immiscible polymer blend system; however, there is no fundamental understanding of how …
被引用次数：44 相关文章 所有 7 个版本