In this study, the pitting behaviors of wrought and SLM 316L SSs (stainless steels) are
comparatively investigated under the conditions of different aggressiveness. The …

Pitting and crevice corrosion of metals and alloys are a major cause of failure in chemical
processing, desalination plants, pulp bleach plants, scrubbers for flue gas desulfurization …

The effects of surface roughness on metastable pitting susceptibility of type 304 (UNS
S30400) stainless steel (SS) in chloride (Cl−) solution and the transition to stable pitting …

Two types of stainless steel were exposed to the alternate conditions of 1 h immersion in
chloride-containing solution and 7 h drying at 30° C and 67% RH. The corrosion rates and …

To clarify the critical relative humidity (RH) to initiate pitting corrosion and the rusting
mechanism in a marine atmospheric environment, pitting corrosion of Type 430 stainless …

In this research, pitting corrosion of martensitic stainless steel in presence of halide anions
was investigated by using polarization techniques. Results confirm that the aggressivity of …

The effects of applied stress on the pitting of sensitized Type 304 stainless steel were
investigated in 4 M MgCl 2 immersion test. Regardless of whether stress was applied, pitting …

It has long been accepted that manganese sulphide favours pitting on stainless steels.
However, there are different standpoints on the most important mechanism for pit initiation; …

The influences of temperature and chloride concentration on pitting corrosion of stainless
steel AISI 304 were investigated. Conventional large-scale measurements (sample …

The transition from metastable to stable pitting was studied in 0.5 M NaCl water solution for
two cast duplex stainless steels under different microstructural conditions achieved by …