Chemical insights into the two-stage ignition behavior of NH3/H2 mixtures in an RCM
This study investigated the two-stage ignition behavior of NH 3/H 2 mixtures using a rapid
compression machine (RCM). The ignition delay times and first-stage ignition delay times of …
compression machine (RCM). The ignition delay times and first-stage ignition delay times of …
Investigating auto-ignition characteristics and kinetic modeling of NH3/CH4 mixtures using an RCM
Ammonia (NH 3) has shown promise as a carbon-neutral fuel, and blending NH 3 with
methane (CH 4) can improve its combustion characteristics. This study investigated the auto …
methane (CH 4) can improve its combustion characteristics. This study investigated the auto …
Shock tube and kinetic modeling study on high-temperature ignition of ammonia blended with methyl hexanoate
Ammonia (NH 3) is a promising carbon-free and alternative fuel, but its applications are
hindered by high auto-ignition temperature and low burning velocity. A common approach to …
hindered by high auto-ignition temperature and low burning velocity. A common approach to …
Experimental and numerical analysis of the autoignition behavior of NH3 and NH3/H2 mixtures at high pressure
L Dai, S Gersen, P Glarborg, H Levinsky… - Combustion and flame, 2020 - Elsevier
Measurements of autoignition delay times of NH 3 and NH 3/H 2 mixtures in a rapid
compression machine are reported at pressures from 20–75 bar and temperatures in the …
compression machine are reported at pressures from 20–75 bar and temperatures in the …
Experimental and kinetic modeling study of the autoignition and oxidation of ammonia/ethane mixtures in a rapid compression machine and a jet-stirred reactor
Ignition delay times and speciation data of ammonia/ethane (NH 3/C 2 H 6) fuel blends were
measured in a rapid compression machine (RCM) and in a jet-stirred reactor coupled with …
measured in a rapid compression machine (RCM) and in a jet-stirred reactor coupled with …
An experimental and modeling study on auto-ignition kinetics of ammonia/methanol mixtures at intermediate temperature and high pressure
A rapid compression machine (RCM) has been applied to measure the ignition delay times
of NH 3/CH 3 OH mixtures covering pressures of 20 and 40 bar, equivalence ratios of 0.5 …
of NH 3/CH 3 OH mixtures covering pressures of 20 and 40 bar, equivalence ratios of 0.5 …
High-temperature auto-ignition characteristics of NH3-H2-CH4
X Chu, X Li, P Gao, Z Ma, H Xiao, C Xie, Z Zhang… - Fuel, 2024 - Elsevier
To extend the application range of the carbon-free fuel ammonia (NH 3), the ignition delay
time (IDT) of NH 3/H 2/CH 4 ternary fuel at high temperatures was measured using the …
time (IDT) of NH 3/H 2/CH 4 ternary fuel at high temperatures was measured using the …
Autoignition studies of NH3/CH4 mixtures at high pressure
L Dai, S Gersen, P Glarborg, A Mokhov… - Combustion and …, 2020 - Elsevier
Autoignition delay times of NH 3/CH 4 mixtures with CH 4 fractions of 0%, 5%, 10% and 50%
were measured in a rapid compression machine at equivalence ratio φ= 0.5, pressures from …
were measured in a rapid compression machine at equivalence ratio φ= 0.5, pressures from …
An experimental and detailed kinetic modeling study of the auto-ignition of NH3/diesel mixtures: Part 2-Wide pressures up to 120bar
Ammonia (NH 3) blending combustion strategy has been regarded as a high-efficient form of
NH 3 utilization. To understand the high-pressure gas-phase auto-ignition characteristics of …
NH 3 utilization. To understand the high-pressure gas-phase auto-ignition characteristics of …
Development of a chemical kinetic mechanism for ammonia/macromolecular hydrocarbon combustion
C-free fuel ammonia has a high auto-ignition temperature and low flame speed compared to
conventional hydrocarbon fuels, which limits its application in internal combustion engines …
conventional hydrocarbon fuels, which limits its application in internal combustion engines …