The influence of micro-Ca/In alloying on the microstructural characteristics, electrochemical
behaviors and discharge properties of extruded dilute Mg-0.5 Bi-0.5 Sn-based (wt.%) alloys …

In this study, the discharge behaviors of extruded low-alloyed Mg–Bi–Ca alloys in an
aqueous electrolyte (3.5 wt% NaCl solution) were investigated using electrochemical …

In this study, the microstructural characteristic, electrochemical behavior and discharge
performance of extruded Mg-xBi (x= 0.5, 1.0 and 2.0 wt%) anodes are systematically …

Controlling the microstructure and discharge performance of Mg-based alloys is of great
importance and aimed at optimizing magnesium anode materials to the level required for …

Abstract Mg-0.5 Sn-0.5 Mn-0.5 Ca (wt.%) alloys with different microstructures are designed
through casting and extrusion with and without homogenization treatment prior to extrusion …

In this work, in order to reveal the role of crystallographic orientation in the electrochemical
and discharge behaviors of the extruded diluted Mg-0.5 Sn-0.5 Zn-0.5 Ca (wt.%) alloy …

The extruded Mg–9Al–xIn alloys are systematically studied as the potential anode material
for primary Mg–air batteries. In this study, the effect of grain size and second phase particles …

In this study, we report a novel, non-rare earth Mg alloy-based anode for Mg air battery
applications. The Mg-xAl-1Sn (x= 0, 3, 6, 9) alloy series were synthesized and subjected to …

In this work, the self-corrosion and discharge performance of the as-cast Mg-xSn (x= 1, 5, 9
wt%) anodes for primary Mg-air batteries were studied through microstructure …

The discharge performance of Mg-6wt.% Al-1wt.% Sn alloy is enhanced by hot extruding
and subsequent annealing treatment. Limited dynamic recrystallization is observed during …