Dissimilar metal welds (DMW) of ferritic to austenitic stainless steel are broadly used in
steam generators working in power generation industries. Frequent failure of DMWs from the …

Dissimilar metal joints between pipes of ferritic and austenitic steels are widely used in
steam generators of power plants. Failure analysis carried out on a dissimilar weld joint and …

This paper aims to investigate the effect of different weld groove configurations on the
residual stresses dispersed in 40 mm thick multipass high strength low alloy (HSLA) steel …

Residual tensile stresses often increase the susceptibility to cold cracking, and also promote
brittle fracture, fatigue failure, and stress corrosion cracking in combination with tensile …

In this study, a thermo-mechanical model was utilized to investigate the effects of welding
parameters on the distribution of residual stresses in dissimilar TIG welds of low carbon and …

Dissimilar metal welds are necessary in high-pressure subsea systems and in cases where
forged components must be welded to pipelines. F22 (2.25 Cr-1Mo) steel is often used in …

This research article reports the correlation between microstructure, mechanical properties,
and residual stresses of dissimilar weld joints (DWJs) between P92 martensitic steel and …

In this study, a butt-welded joint between P92 ferritic steel and SUS304 austenitic stainless
steel was fabricated with a nickel-based filler material. Based on Sysweld software, three …

This paper presents a three-dimensional (3D) finite element (FE) analysis to investigate the
influence of the welding sequence in the circumferential direction on residual stress …

In this study, an advanced computational approach with considering moving heat source,
temperature-dependent material properties, strain-hardening and annealing effect was …