We quantitatively investigated the fracture morphologies of Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 and Pd 78 Cu 6 Si 16 metallic glasses (MGs) under compression. The characteristic features …
Bulk metallic glass alloys exhibit an impressive range of mechanical properties including large elastic strains to failure (el 2%) and high tensile strengths (2 GPa)(1, 2). However, their …
Some bulk metallic glasses (BMGs) exhibit high crack initiation toughness due to shear band mediated plastic flow at the crack tip and yet do not display additional resistance to …
Mode I fracture experiments were conducted on brittle bulk metallic glass (BMG) samples and the fracture surface features were analyzed in detail to understand the underlying …
KF Gan, SS Jiang, YJ Huang, HBC Yin, JF Sun… - International Journal of …, 2019 - Elsevier
The plastic deformation of metallic glasses (MG) is well-known to occur via shear transformation zones (STZs) on the scale of atomic clusters, yet fracture of MG takes place …
KM Flores, RH Dauskardt - Journal of the Mechanics and Physics of Solids, 2006 - Elsevier
Shear band formation and fracture are characterized during mode II loading of a Zr-based bulk metallic glass. The measured mode II fracture toughness, KIIc= 75±4MPa√ m, exceeds …
Dynamic “forced” shear and quasi-static tensile tests were performed on a typical Vitreloy 1 bulk metallic glass (BMG). The nanoscale shear band is found to initiate in a local plastic …
The Anand–Su theory for large elastic–plastic deformations of metallic glasses is modified to account for the strongly nonlinear and eventually softening dilatational volumetric elastic …
Significant progress in understanding the mechanical behavior of metallic glasses (MGs) was made over the past decade, particularly on mechanisms of plastic deformation …