Physics-based large-deformation analysis of coseismic landslides: A multiscale 3D SEM-MPM framework with application to the Hongshiyan landslide
A multiscale framework is developed based on the spectral element method (SEM) and
material point method (MPM) for the large-deformation analysis of coseismic landslides. At a …
material point method (MPM) for the large-deformation analysis of coseismic landslides. At a …
An integrated SEM-Newmark model for physics-based regional coseismic landslide assessment
Earthquake-induced landslides are one of the most catastrophic effects of earthquakes, as
evidenced by many historic events over the past decades, such as the 1994 Northridge …
evidenced by many historic events over the past decades, such as the 1994 Northridge …
A regional scale coseismic landslide analysis framework: Integrating physics-based simulation with flexible sliding analysis
This paper describes a framework for regional scale coseismic landslide evaluation that
combines physics-based wave propagation simulation at a regional scale, with flexible …
combines physics-based wave propagation simulation at a regional scale, with flexible …
Numerical investigation of the recent Chenhecun landslide (Gansu, China) using the discrete element method
Z Chen, D Song - Natural Hazards, 2021 - Springer
Loess–mudstone landslides are widely distributed in Northwest China. However, the
deformation features and kinematic processes of these landslides are still not well …
deformation features and kinematic processes of these landslides are still not well …
A procedure for 3D seismic simulation from rupture to structures by coupling SEM and FEM
L Zhang, JT Wang, YJ Xu, CH He… - Bulletin of the …, 2020 - pubs.geoscienceworld.org
This article aims at numerically simulating the 3D seismic wave propagation from rupture to
structures. A two‐step method coupling the spectral element method (SEM) and the finite …
structures. A two‐step method coupling the spectral element method (SEM) and the finite …
Numerical modelling of seismic slope failure using MPM
T Bhandari, F Hamad, C Moormann, KG Sharma… - Computers and …, 2016 - Elsevier
Abstract The Finite Element Method (FEM) is widely used in the simulation of geotechnical
applications. Owing to the limitations of FEM to model problems involving large …
applications. Owing to the limitations of FEM to model problems involving large …
On the dynamic fragmentation and lubrication of coseismic landslides
The three‐dimensional discrete element method has been employed to analyze the
dynamic fragmentation and lubrication mechanisms of coseismic Tangjiashan landslide …
dynamic fragmentation and lubrication mechanisms of coseismic Tangjiashan landslide …
Extended DDA with rotation remedies and cohesive crack model for simulation of the dynamic seismic landslide
S Gong, C Hu, L Guo, D Ling, G Chen… - Engineering Fracture …, 2022 - Elsevier
The failure of earthquake-induced landslides generally involves four stages: tensile
cracking, breaking of the substrate, shearing failure, and deposition of the sliding mass …
cracking, breaking of the substrate, shearing failure, and deposition of the sliding mass …
Numerical modeling and dynamic analysis of the 2017 Xinmo landslide in Maoxian County, China
A catastrophic landslide occurred at Xinmo village in Maoxian County, Sichuan Province,
China, on June 24, 2017. A 2.87× 10 6 m 3 rock mass collapsed and entrained the surface …
China, on June 24, 2017. A 2.87× 10 6 m 3 rock mass collapsed and entrained the surface …
Landslide reconstruction using seismic signal characteristics and numerical simulations: Case study of the 2017 “6.24” Xinmo landslide
Landslide modeling based on seismic signal characteristics is an effective method to study
landslide evolution. The scientific challenge lies in how to systematically characterize and …
landslide evolution. The scientific challenge lies in how to systematically characterize and …