Flash sintering has been applied to various ceramics since it was first reported. However,
the flash sintering of lead zirconate titanate (PZT) at room temperature has not been …

Abstract Generally, a high temperature (> 1100° C) is required to sinter Lead Zirconate
Titanate (PZT) ceramics. Such a high sintering temperature results in significant lead oxide …

Lead‐based piezo‐ceramics like lead zirconate titanate (PZT) are a mainstay for many
piezoelectric applications. However, lead oxide (PbO) evaporation during sintering poses a …

Flash sintering of lead zirconate titanate ceramics were investigated under DC electric fields
ranging from 300 to 600 V/cm. The onset temperature for flash sintering significantly …

Dense and pure PZT ceramics are successfully fabricated by reaction flash sintering of the
PbO-ZrO 2-TiO 2 mixed oxides, which enables the chemical reaction and sintering to take …

Sintering behaviors of lead zirconate titanate ceramics under an alternating current (AC)
electrical field with a frequency of 60 Hz is investigated. The AC field is more effective to …

This paper describes a cold sintering process for Pb (Zr, Ti) O 3 ceramics and the associated
processing-property relations. Pb (Zr, Ti) O 3 has a very small, incongruent solubility that is a …

The objective of this work was twofold, ie to develop an aqueous route for tape casting Lead
Ziconate Titanate (PZT) ceramics for pyroelectric applications and to optimise the die …

This review gathers detail on the processing of piezo‐ferroelectric ceramic materials by
spark plasma sintering for the first time. The results reported here clearly indicate that it is a …

Flash sintering method was adopted to sinter SiO 2-coated BaTiO 3 ceramics to lower
sintering temperature and shorten sintering time. The microstructure and dielectric property …