In this study, cold metal transfer (CMT) brazing technique was used for lap joining of 1.2 mm
thick galvanized dual phase (DP780) steel using CuAl10Fe filler wire. The aim of this study …

In this paper, cold metal transfer (CMT) welding-brazing of automotive grade dual phase
steel with Al 5052 alloy using ER 4043 filler wire was studied. The present work objective is …

To explore the influence of wire feed rate (WFR) to speed ratio on arc stability, interfacial
microstructure and mechanical properties, cold metal transfer (CMT) weld-brazed lap joints …

In this work, C-Mn-440 steel was joined using CMT brazing with CuAl8 filler. Results showed
that wettability, fraction of intermetallic phases in bead and intermetallic layer at the interface …

Gas metal arc brazing (GMAB) is a non-fusion joining process used in the automotive
industry for joining thin-gauge Zn-coated steel sheets to other steels or dissimilar metals …

Bead-on-plate cold metal transfer (CMT) brazing and overlap CMT welding–brazing of 7075
aluminium alloy and galvanized steel at different preheating temperatures were studied. The …

Gas metal arc brazing (GMAB) technology is a transformative non-fusion joining process
used in the joining of thin-gauge advanced high strength steels (AHSSs) employed in the …

Metal inert gas (MIG) brazing is a potential process for joining coated automotive steel
sheets over conventional fusion welding process. However, understanding the process …

Cold metal transfer welding, a low-heat input process, was employed to weld-braze 6061-T6
aluminium alloy to galvanized interstitial free steel using Al–Si-based (4043 and 4047) filler …

In this work, novel CMT+ P weld-brazing process was used for joining aluminium (AA5052)
and steel (DP780) in lap position with increasing Al sheet thickness. Results showed that …