This study systematically compared the microstructural evolution and mechanical behavior
of the extruded AXM10304 alloy during tensile deformation along both the extrusion …

Due to their excellent strength-to-weight ratio, Mg alloys are attractive for applications where
weight savings are critical. However, the limited cold formability of wrought Mg alloys …

Wrought Mg alloys especially precipitation-hardenable rare-earth alloys have promising
potential for structural applications. However, wrought Mg alloys usually possess …

Addition of a small amount of Ca improves the ductility of Mg alloys. However, the
mechanism underlying this effect is not well understood. In this work, tensile testing of an …

The tensile deformation mechanisms of an extruded Mg-1Mn (wt.%) alloy at 323 K (50° C)
was investigated by a combination of in situ tensile testing and electron backscatter …

The effect of strain rate, ε̇, and temperature, T, on the tension–compression asymmetry
(TCA) in a dilute and wrought Mg alloy, AM30, over a temperature range that covers both …

The effect of variable Ca (0.3 and 0.5 (wt%)) and deformation temperature on the
microstructure, texture and slip behavior of pure Mg is investigated. The uniaxial …

The present study subjects the extruded Mg-6Al-1Zn-1.1 Sc (wt%) alloy to reveal the
deformation during in-situ tensile testing at room temperature by scanning electron …

An extruded Mg–1Mn–1Nd (wt%)(MN11) alloy was tested in tension in an SEM at
temperatures of 323 K (50° C), 423 K (150° C), and 523 K (250° C) to analyse the local …

Abstract An extruded Mg-3.0 Y alloy with non-basal texture of< 4 2¯ 2¯ 3> component was
fabricated by common extrusion and exhibited a high elongation of∼ 33%. The deformation …