This study investigates the fabrication, optimization, and performance of submicron
polyacrylonitrile (PAN) and nanofiber cellulose triacetate (CTA) air filters produced through …

Abstract Polyacrylonitrile/poly (acrylic acid)(PAN/PAA with weight radios of 3/7, 4/6, 5/5, 6/4,
7/3 and 10/0) nanofibers (NFs) were prepared as filter medium by electrospinning. The …

Electrospun polyamide 6 (PA 6) and polyamide 6/6 (PA 6/6) nanofibers were produced in
order to investigate their experimental characteristics with the goal of obtaining filtration …

Cellulose acetate (CA) nanofibers were prepared via electrospinning to obtain a high quality
factor (QF) fibrous mat for aerosol particle filtration. To this purpose, special attention was …

Reported in this paper are the effects of tip-to-collector distance, voltage, deposition time
and solution concentration on the fiber size distribution and filter quality factor of electrospun …

The potential of poly (acrylonitrile) electrospun membranes with tuneable pore size and fiber
distributions were investigated for airborne fine‐particle filtration for the first time. The impact …

Often, solid matter is separated from particle-laden flow streams using electrospun filters due
to their high specific surface area, good ability to capture aerial particulate matter, and low …

Electrospun polyacrylonitrile (PAN) fibers of very small diameters have potential for
integration into filters capable of increasing the particle filtration efficiency. To fulfill the …

The engineering of the next generation of fibrous air membranes that exhibit high air
filtration and quality factor performances are a critical challenge. Microfibrous air …

To further target product development with low environmental impact, an integral green
electrospinning (G‐ES) approach has been adopted through the simultaneous application of …