The strain hardening behavior in relation with the evolving dislocation substructures during
uniaxial tensile deformation for an austenite–ferrite Fe–Mn–Al–C steel was investigated in …

The hot deformation and dynamic recrystallization (DRX) behavior of austenite-based Fe–
27Mn–11.5 Al–0.95 C steel with a density of 6.55 g cm− 3 were investigated by compressive …

The deformation response of a (Nb, V) micro-alloyed FeMnAlC low density steel has been
investigated as a function grain size using samples subjected to different solution-treatment …

Abstract The three-dimensional (3D) morphology, spatial distribution and two-dimensional
(2D) distribution of each cross-section of the surface cracks were investigated in detail with …

This study presents an application of thermomechanical treatment technique (cold rolling
followed by aging treatment) to significantly enhance the mechanical properties of a novel …

A new type of lightweight high aluminum bearing steel had been developed based on the
widely used high carbon chromium bearing steel. Via multi-scale experimental …

The aim of the present work was to reveal the wear behavior and hardening mechanism of
novel lightweight Fe–25.1 Mn–6.6 Al–1.3 C cast steel under abrasive impact wear with …

A hot rolled (austenite+ δ-ferrite) duplex steel was solution treated at various temperatures
and durations. The comprehensive mechanical properties of the steel were improved and …

The impact abrasive wear behaviors of light-weight austenitic Fe-24Mn-7Al-lC steel with
increasing impact wear conditions were studied by comparing with the modified Hadfield …

This study investigated the stress–strain behavior and microstructural changes of Fe-Mn-Si-
C twin-induced plasticity (TWIP) steel cylindrical components at different depths of deep …