The present study designed a set of extrusion dies with unequal bearing lengths to
investigate the extrusion deformation behavior of 2195 Al–Li alloy. With the standard …

In this work, the homogenized Al–Li alloys were compressed at different strains (20%–80%)
under medium (370° C) and high temperatures (470° C), and their microstructures were …

Interfacial bonding behavior of 7050 aluminum alloy clad plates during hot-roll cladding
under different vacuum degrees was investigated. The results demonstrated that the …

In the materials science domain, the accurate prediction of the yield strength of metallic
compositions has often resulted in extensive experimental endeavors, leading to …

The hot deformation behavior of the as-rolled 7050 aluminum alloy was investigated using
isothermal hot compression experiments with temperatures ranging from 300 to 460° C and …

The influence of normal rolling and cross-rolling on the microstructure, mechanical
properties, and anisotropy of Al-3Li-1Cu-0.4 Mg-0.1 Er-0.1 Zr alloy was investigated. With an …

Abstract In this work, 2195 Al–Li alloys with various precipitation microstructures were
obtained by homogenization treatment followed by air-cooling (AC), discontinuous cooling …

The dynamic recrystallization (DRX) behavior and microstructure evolution of a novel Al-Zn-
Mg-Cu-Zr alloy was investigated by isothermal compression tests at temperature of 350 …

For this article, hot compression tests were carried out on homogenized 2050 Al-Cu-Li alloys
under different deformation temperatures and strain rates, and an Arrhenius-type constitutive …

The presented work explores the quasi-static response of AA2524-T3 alloy studied under
hot tensile loading. The impact on the flow stress of this alloy due to different strain rates in …