[HTML][HTML] Effect of intragranular κ carbides and intergranular precipitates on the hot deformation mechanism and dynamic recrystallization mechanism of Fe–28Mn …
J Liu, L Li, S Yang, C Ding, E Wang, X Yu, H Wu… - Journal of Materials …, 2023 - Elsevier
The hot compression tests of Fe–28Mn–11Al–1.5 C–5Cr (wt.%) lightweight steel were
carried out by Gleeble-3500 at temperature of 900, 1050 and 1150° C with strain rates of …
carried out by Gleeble-3500 at temperature of 900, 1050 and 1150° C with strain rates of …
Effect of alloying content on microstructure and mechanical properties of Fe–Mn–Al–C low-density steels
H Wang, C Wang, J Liang, A Godfrey, Y Wang… - Materials Science and …, 2023 - Elsevier
A series of low-density steels with alloying contents of C from 0.6 to 1.5%, Mn from 20 to
35%, and Al from 6.0 to 12.0% were fabricated in the laboratory. The microstructure, density …
35%, and Al from 6.0 to 12.0% were fabricated in the laboratory. The microstructure, density …
Study of elastoplastic deformation and crack evolution mechanism of single-crystal ice during uniaxial compression using 3D digital image correlation
C Wang, D Han, Q Wang, Y Wang, Y Zhang… - Engineering Fracture …, 2023 - Elsevier
Single-crystal freshwater ice was subjected to uniaxial compression tests with different strain
rates and crystal orientations, and the real-time full-field deformation and strain were …
rates and crystal orientations, and the real-time full-field deformation and strain were …
Development of novel low density ultra-high strength manganese-steel with significant ductility through thermo-mechanical processing route
N Kisku - Materials Science and Engineering: A, 2024 - Elsevier
The development of ultra-high strength steels for automotive applications is often associated
with insufficient ductility or formability properties. To overcome this problem, a high Mn alloy …
with insufficient ductility or formability properties. To overcome this problem, a high Mn alloy …
Improved strength-ductility synergy and corrosion resistance in a model 45 steel by surface Cr microalloying and laser remelting
W Zhao, Y Liu, P Xu, YH Gao, X Wu, X Liu… - Available at SSRN … - papers.ssrn.com
This work uses chromium (Cr) microalloying in a model 45 steel to optimize the strength-
ductility synergy. This goal is realized by a microstructural design strategy of introducing …
ductility synergy. This goal is realized by a microstructural design strategy of introducing …