Chemistry of carbon nanotubes
The unidirectional growth of materials to form nanowires or nanotubes has attracted
enormous interest in recent years. Within the different classes of tubes made of organic or …
enormous interest in recent years. Within the different classes of tubes made of organic or …
Structural and mechanical properties of polymer nanocomposites
SC Tjong - Materials Science and Engineering: R: Reports, 2006 - Elsevier
Recently, polymer nanocomposites reinforced with lower volume fraction of nanoceramics
and carbon nanotubes have attracted steadily growing interest due to their peculiar and …
and carbon nanotubes have attracted steadily growing interest due to their peculiar and …
The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube composite
J Xiong, Z Zheng, X Qin, M Li, H Li, X Wang - Carbon, 2006 - Elsevier
A polyurethane/multi-walled carbon nanotube elastomer composite was synthesized. The
microstructure of the composite was examined by field-emission scanning electron …
microstructure of the composite was examined by field-emission scanning electron …
Low percolation threshold in single-walled carbon nanotube/high density polyethylene composites prepared by melt processing technique
Q Zhang, S Rastogi, D Chen, D Lippits, PJ Lemstra - Carbon, 2006 - Elsevier
A new method was developed to disperse carbon nanotubes (CNTs) in a matrix polymer
and then to prepare composites by melt processing technique. Due to high surface energy …
and then to prepare composites by melt processing technique. Due to high surface energy …
Effective amino-functionalization of carbon nanotubes for reinforcing epoxy polymer composites
An effective functionalization method was investigated to take full advantage of the
exceptional performance of both carbon nanotubes and epoxy polymer for composite …
exceptional performance of both carbon nanotubes and epoxy polymer for composite …
Poly(l-lactide) (PLLA)/Multiwalled Carbon Nanotube (MWCNT) Composite: Characterization and Biocompatibility Evaluation
Much effort has been directed at the fabrication of carbon nanotubes (CNTs)/polymer
composites and the characterization of their physical properties. Among them, composites …
composites and the characterization of their physical properties. Among them, composites …
In situ polymerization approach to multiwalled carbon nanotubes-reinforced nylon 1010 composites: mechanical properties and crystallization behavior
H Zeng, C Gao, Y Wang, PCP Watts, H Kong, X Cui… - Polymer, 2006 - Elsevier
A series of polyamide 1010 (PA1010 or nylon 1010) and multiwalled carbon nanotubes
(MWNTs) composites were prepared by in situ polymerization of carboxylic acid …
(MWNTs) composites were prepared by in situ polymerization of carboxylic acid …
Dispersion and rheological aspects of SWNTs in ultrahigh molecular weight polyethylene
Q Zhang, DR Lippits, S Rastogi - Macromolecules, 2006 - ACS Publications
A new method is developed to homogeneously disperse single-walled carbon nanotubes
bundles (SWNTs) in an intractable polymer, for example, ultrahigh molecular weight …
bundles (SWNTs) in an intractable polymer, for example, ultrahigh molecular weight …
Preparation of poly (acrylic acid) grafted multiwalled carbon nanotubes by a two-step irradiation technique
S Chen, G Wu, Y Liu, D Long - Macromolecules, 2006 - ACS Publications
A facile strategy to prepare water-soluble multiwalled carbon nanotubes (MWNTs) by two
steps of γ radiation is developed. First, MWNTs are irradiated in ethanol. The radiolysis of …
steps of γ radiation is developed. First, MWNTs are irradiated in ethanol. The radiolysis of …
Waterborne, nanocomposite pressure‐sensitive adhesives with high tack energy, optical transparency, and electrical conductivity
Transparent and conductive pressure‐sensitive adhesives are cast from aqueous colloidal
dispersions of poly (butyl acrylate)(P (BuA)) and functionalized carbon nanotubes (CNTs). At …
dispersions of poly (butyl acrylate)(P (BuA)) and functionalized carbon nanotubes (CNTs). At …