Hexagonal materials deform plastically by activating diverse slip and twinning modes. The
activation of such modes depends on their relative critical stresses, and the orientation of the …

Dynamic recrystallization (DRX) behavior of as-cast AZ91 magnesium alloy during hot
compression at 300° C and the strain rate of 0.2 s− 1 was systematically investigated by …

Magnesium alloys are increasingly used in automotive and aerospace industries for weight
reduction and fuel economy improvement. Low cycle fatigue (LCF) behavior of these alloys …

The fracture mechanism during fracture toughness testing has been investigated on a
coarse-grained magnesium alloy, with an average grain size of∼ 50 µm, and a low fracture …

Electron backscattered diffraction is employed to explore the influence of deformation
conditions on microstructure and texture evolution of commercially pure Ti after hot …

采用分离式Hopkinson 杆在应变速率为496~ 2120 s^-1 范围对挤压态AZ31B
镁合金进行了高速冲击压缩实验, 并采用金相显微镜对压缩后镁合金的组织演变规律进行研究 …

In situ observation of HPDC AM50 alloy in the SEM chamber was performed to study the
changes of the micro-voids and the β phase during tensile deformation. The results …

The potential for decreasing the texture intensity generated during the bulk deformation of
Mg alloys was investigated using a combination of contraction twinning, double (secondary) …

The deformation mechanisms of magnesium are investigated in order to obtain results for a
better understanding of texture evolution and anisotropic behavior of magnesium wrought …

The mechanical behaviors and the associated deformation mechanisms with a focus on
extension twinning under monotonic and cyclic loadings are investigated using neutron and …