Effects of rotation rates on microstructure, mechanical properties, and fracture behavior of friction stir-welded (FSW) AZ31 magnesium alloy
J Yang, D Wang, BL Xiao, DR Ni, ZY Ma - Metallurgical and Materials …, 2013 - Springer
Three rotation rates were selected for friction stir welded (FSW) rolled AZ31 plates, at a
constant welding speed of 100 mm/minutes. As the rotation rate was increased from 800 and …
constant welding speed of 100 mm/minutes. As the rotation rate was increased from 800 and …
Flow softening, twinning and dynamic recrystallization in AZ31 magnesium
X Liu, JJ Jonas, LX Li, BW Zhu - Materials Science and Engineering: A, 2013 - Elsevier
The compression tests were carried out on AZ31 magnesium alloy samples at temperatures
from 300 to 450° C and strain rates of 0.03–0.3 s− 1. The evolution of the microstructure and …
from 300 to 450° C and strain rates of 0.03–0.3 s− 1. The evolution of the microstructure and …
In situ identification of twin-related bands near yielding in a magnesium alloy
Digital image correlation and acoustic emission were used simultaneously to investigate the
near-yielding behavior of textured samples of a magnesium alloy. Distinct band evolution …
near-yielding behavior of textured samples of a magnesium alloy. Distinct band evolution …
Twinning in magnesium alloy AZ31B under different strain paths at moderately elevated temperatures
Twinning activity and deformation limits were investigated for wrought and cast magnesium
at room and moderately elevated temperatures and varying strain paths. In situ compression …
at room and moderately elevated temperatures and varying strain paths. In situ compression …
Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60–AZ31
D Liu, R Xin, X Zheng, Z Zhou, Q Liu - Materials Science and Engineering: A, 2013 - Elsevier
Dissimilar friction stir welding (FSW) of ZK60 and AZ31 magnesium alloys was studied. Two
kinds of material arrangements, with ZK60 or AZ31 in advancing side (AS), were applied …
kinds of material arrangements, with ZK60 or AZ31 in advancing side (AS), were applied …
Grain refinement and fatigue strengthening mechanisms in as-extruded Mg–6Zn–0.5 Zr and Mg–10Gd–3Y–0.5 Zr magnesium alloys by shot peening
W Liu, G Wu, C Zhai, W Ding, AM Korsunsky - International Journal of …, 2013 - Elsevier
This paper studies the fatigue properties and fracture behavior of as-extruded Mg–6Zn–0.5
Zr and Mg–10Gd–3Y–0.5 Zr alloys before and after shot peening. Compared to Mg–6Zn–0.5 …
Zr and Mg–10Gd–3Y–0.5 Zr alloys before and after shot peening. Compared to Mg–6Zn–0.5 …
Room temperature equal-channel angular pressing of a magnesium alloy
Equal-channel angular pressing (ECAP) of magnesium alloy Mg–3Al–1Zn (wt.%) has been
carried out at room temperature by applying a back-pressure three times larger than the …
carried out at room temperature by applying a back-pressure three times larger than the …
Tension–compression asymmetry in an extruded Mg alloy AM30: Temperature and strain rate effects
The effect of strain rate, ε̇, and temperature, T, on the tension–compression asymmetry
(TCA) in a dilute and wrought Mg alloy, AM30, over a temperature range that covers both …
(TCA) in a dilute and wrought Mg alloy, AM30, over a temperature range that covers both …
Effect of cryogenic treatment on the microstructure and mechanical properties of Mg–1.5 Zn–0.15 Gd magnesium alloy
Y Liu, S Shao, C Xu, X Zeng, X Yang - Materials Science and Engineering …, 2013 - Elsevier
The effect of cryogenic treatment on the microstructure and mechanical properties of Mg–1.5
Zn–0.15 Gd (at%) alloy were investigated. The result showed that numerous W phase …
Zn–0.15 Gd (at%) alloy were investigated. The result showed that numerous W phase …
Investigation of fatigue anisotropy in an extruded magnesium alloy
JB Jordon, HR Brown, H El Kadiri, HM Kistler… - International journal of …, 2013 - Elsevier
This work presents an investigation on the fatigue behavior of magnesium AM30 alloy in the
extruded and transverse directions. Experimental results from strain-controlled fatigue tests …
extruded and transverse directions. Experimental results from strain-controlled fatigue tests …