Ultra-high performance concrete UHPC
E Fehling, M Schmidt, J Walraven… - Ernst & Sohn: Berlin …, 2014 - Wiley Online Library
When Otto Graf managed to produce a concrete with a strength of 70 N/mm2 in the early
1950s, the construction industry showed very little interest in this new product. And this lack …
1950s, the construction industry showed very little interest in this new product. And this lack …
[HTML][HTML] Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECC
In this study, the influences of matrix flowability, fiber mixing procedure, and curing
conditions on the mechanical properties of Engineered Cementitious Composites (ECC) …
conditions on the mechanical properties of Engineered Cementitious Composites (ECC) …
[HTML][HTML] Size and geometry dependent tensile behavior of ultra-high-performance fiber-reinforced concrete
This research investigated direct tensile stress versus strain response of ultra-high-
performance fiber-reinforced concrete (UHPFRC) with various sizes and geometries. The …
performance fiber-reinforced concrete (UHPFRC) with various sizes and geometries. The …
Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material
In this study, a paraffin/diatomite composite phase change material (PCM) was used as fine
aggregate in the production of novel thermal energy storage engineered cementitious …
aggregate in the production of novel thermal energy storage engineered cementitious …
Fiber distribution and orientation in UHP-FRC beams and their effect on backward analysis
K Wille, NV Tue, GJ Parra-Montesinos - Materials and structures, 2014 - Springer
In this study 23 ultra-high performance fiber reinforced concrete (UHP-FRC) notched beams
were tested in order to investigate the effect of fiber orientation and distribution on the …
were tested in order to investigate the effect of fiber orientation and distribution on the …
Influences of geometric patterns of 3D spacer fabric on tensile behavior of concrete canvas
F Han, H Chen, K Jiang, W Zhang, T Lv… - Construction and Building …, 2014 - Elsevier
In this study, influences of geometric patterns of 3D spacer fabric on the tensile behavior of
concrete canvas (CC) were investigated. Five 3D spacer fabrics with different geometric …
concrete canvas (CC) were investigated. Five 3D spacer fabrics with different geometric …
Collapse of sandwich pipes with PVA fiber reinforced cementitious composites core under external pressure
Sandwich pipes (SP) with steel tubes and a lightweight flexible core are under consideration
as a potential solution for ultra-deepwater submarine pipelines, combining high structural …
as a potential solution for ultra-deepwater submarine pipelines, combining high structural …
延性纤维混凝土剪力墙抗震性能试验研究
邓明科， 寇佳亮， 梁兴文， 秦萌 - 工程力学, 2014 - engineeringmechanics.cn
该文为改善高性能混凝土剪力墙的抗震性能, 提出在剪力墙塑性铰区采用延性纤维混凝土(DFRC
), 设计了4 片剪跨比为2.1 的剪力墙试件, 并进行了拟静力试验. 通过改变DFRC 区高度 …
), 设计了4 片剪跨比为2.1 的剪力墙试件, 并进行了拟静力试验. 通过改变DFRC 区高度 …
[PDF][PDF] Mechanical Performance of Reinforced Concrete and Steel Fiber-Reinforced Concrete Precast Tunnel Lining Segments: A Case Study.
The use of precast concrete tunnel lining (PCTL) systems in tunneling projects has been
increasing as a result of its efficient and economical application in comparison with the …
increasing as a result of its efficient and economical application in comparison with the …
[HTML][HTML] Influence of local raw materials on the mechanical behaviour and fracture process of PVA-SHCC
MS Magalhães, RD Toledo Filho… - Materials Research, 2014 - SciELO Brasil
This paper addresses the results of an investigation on the influence of the Brazilian raw
materials on the mechanical performance of Strain Hardening Cementitious Composites …
materials on the mechanical performance of Strain Hardening Cementitious Composites …