The modelling of dynamic recrystallization in the isothermal compression of 300M steel

The dynamic recrystallization evolution and kinetics of Ni–18.3 Cr–6.4 Co–5.9 W–4Mo–2.19 Al–1.16 Ti superalloy during hot deformation

H Zhang, K Zhang, S Jiang, Z Lu - Journal of Materials Research, 2015 - cambridge.org
The dynamic recrystallization (DRX) behavior of Ni–18.3 Cr–6.4 Co–5.9 W–4Mo–2.19 Al–
1.16 Ti superalloy was investigated by means of isothermal compression tests in the …
被引用次数：34 相关文章 所有 5 个版本

Inverse analysis of the stress–strain curve to determine the materials models of work hardening and dynamic recovery

L Li, B Ye, S Liu, S Hu, B Li - Materials Science and Engineering: A, 2015 - Elsevier
A constitutive equation has been established based on the dislocation theory, the work
hardening and dynamic recovery theory. The stress–strain curves of bainite steel have been …
被引用次数：23 相关文章 所有 2 个版本

Mathematical modeling for microstructural evolution in multi-pass hot compression of Q345E alloy steel

D Qian, Y Peng - Journal of Materials Engineering and Performance, 2015 - Springer
The deformation process and inter-pass time of hot working are always accompanied by
complicated microstructural evolution. As a kind of low alloy steels with good malleability …
被引用次数：10 相关文章 所有 4 个版本

Stress corrosion cracking investigation of high Co‐Ni secondary hardening ultra‐high strength steel in neutral 3.5 wt% NaCl solution

Q Guo, JH Liu, M Yu, SM Li - Materials and Corrosion, 2015 - Wiley Online Library
Stress corrosion cracking (SCC) and passivation behaviour of ultra‐high strength steel
23Co14Ni12Cr3 in neutral 3.5 wt% NaCl solution were investigated by slow strain rate test …
被引用次数：2 相关文章 所有 3 个版本