The kinetics and cellular automaton modeling of dynamic recrystallization behavior of a medium carbon Cr-Ni-Mo alloyed steel in hot working process
C Zhang, L Zhang, Q Xu, Y Xia, W Shen - Materials Science and …, 2016 - Elsevier
The dynamic recrystallization (DRX) behavior of a medium carbon Cr-Ni-Mo alloyed steel
34CrNiMo was studied in the wide temperature range of 900–1150° C and the strain rate of …
34CrNiMo was studied in the wide temperature range of 900–1150° C and the strain rate of …
A new method to establish dynamic recrystallization kinetics model of a typical solution-treated Ni-based superalloy
The dynamic recrystallization (DRX) behavior of a typical solution-treated Ni-based
superalloy is investigated by hot compressive tests and metallographic observations. The …
superalloy is investigated by hot compressive tests and metallographic observations. The …
An improved kinetics model to describe dynamic recrystallization behavior under inconstant deformation conditions
MS Chen, KK Li, YC Lin, WQ Yuan - Journal of Materials Research, 2016 - cambridge.org
The classical dynamic recrystallization (DRX) kinetics models, such as Avrami equation, are
often used to describe the DRX behaviors of alloys. However, it is found that the classical …
often used to describe the DRX behaviors of alloys. However, it is found that the classical …
Dynamic recrystallization kinetics and microstructural evolution for LZ50 steel during hot deformation
S Du, S Chen, J Song - Journal of Materials Engineering and Performance, 2016 - Springer
The dynamic recrystallization (DRX) behavior of LZ50 steel was investigated using hot
compression tests at a deformation temperature of 870-1170° C and a strain rate of 0.05-3 …
compression tests at a deformation temperature of 870-1170° C and a strain rate of 0.05-3 …
Complicated interaction of dynamic recrystallization and precipitation during hot deformation of ultrahigh-strength stainless steel
X Wang, Z Liu, H Luo - Metallurgical and Materials Transactions A, 2016 - Springer
A new ultrahigh-strength stainless steel was compressed at the temperature range of 1273 K
to 1423 K (1000° C to 1150° C) with a strain rate varying from 0.01 to 10 s− 1 using a …
to 1423 K (1000° C to 1150° C) with a strain rate varying from 0.01 to 10 s− 1 using a …
Three-dimensional numerical simulation and experimental analysis of austenite grain growth behavior in hot forging processes of 300M steel large components
J Luo, Y Liu, M Li - Journal of Iron and Steel Research International, 2016 - Springer
The microstructure models were integrated into finite element (FE) code, and a three-
dimensional (3D) FE analysis on the entire hot forging processes of 300M steel large …
dimensional (3D) FE analysis on the entire hot forging processes of 300M steel large …
Corrosion behavior of ultra-high strength steel 300M in different simulated marine environments
Q Guo, J Liu, M Yu, S Li - Journal of Wuhan University of Technology …, 2016 - Springer
Corrosion behavior of 300M in neutral corrosion environments containing NaCl simulated by
total immersion (TI), salt spraying (SS) and periodic immersion (PI), was investigated by …
total immersion (TI), salt spraying (SS) and periodic immersion (PI), was investigated by …
A unified constitutive equation of a bainite steel during hot deformation
L Li, B Ye, S Liu, S Hu, H Liao - Journal of Materials Engineering and …, 2016 - Springer
A constitutive model has been established based on dislocation theory, work hardening and
dynamic recovery theory, and softening mechanisms of dynamic recrystallization. The stress …
dynamic recovery theory, and softening mechanisms of dynamic recrystallization. The stress …
A physically based dynamic recrystallization model considering orientation effects for a nitrogen alloyed ultralow carbon stainless steel during hot forging
G Xie, A He, H Zhang, G Wang, X Wang - Journal of Iron and Steel …, 2016 - Springer
The nitrogen alloyed ultralow carbon stainless steel is a good candidate material for primary
loop pipes of AP1000 nuclear power plant. These pipes are manufactured by hot forging …
loop pipes of AP1000 nuclear power plant. These pipes are manufactured by hot forging …