Texture evolution during static recrystallization of cold-rolled magnesium alloys
Texture evolution in cold-rolled Mg-0.3 Zn-0.1 Ca, Mg-0.4 Zn and Mg-0.1 Ca (at.%) alloys
during static recrystallization is monitored using a quasi-in-situ electron backscatter …
during static recrystallization is monitored using a quasi-in-situ electron backscatter …
Influence of cerium on texture and ductility of magnesium extrusions
RK Mishra, AK Gupta, PR Rao, AK Sachdev… - Essential Readings in …, 2016 - Springer
Abstract Unalloyed Mg and Mg-0.2% Ce alloy were extruded as solid rounds at 400° C in a
500 ton vertical extrusion press at 10 mm/sec. Tensile tests revealed a significant increase in …
500 ton vertical extrusion press at 10 mm/sec. Tensile tests revealed a significant increase in …
The role of atomic scale segregation in designing highly ductile magnesium alloys
Two solid solution binary magnesium-rare earth (RE) alloys, Mg-1wt.% Gd and Mg-1wt.% Dy
were subjected to large strain hot rolling followed by recrystallization annealing at different …
were subjected to large strain hot rolling followed by recrystallization annealing at different …
[HTML][HTML] Grain boundary segregation of rare-earth elements in magnesium alloys
Small additions of rare-earth (RE) elements have been shown to have a powerful effect in
modifying the texture of wrought magnesium alloys, giving a highly beneficial effect in …
modifying the texture of wrought magnesium alloys, giving a highly beneficial effect in …
Yield symmetry and reduced strength differential in Mg-2.5 Y alloy
In this study we report novel results obtained with an extruded fine-grained Mg-2.5 at.% Y
alloy (FG Mg-2.5 Y) exhibiting tension/compression yield symmetry and reduced strength …
alloy (FG Mg-2.5 Y) exhibiting tension/compression yield symmetry and reduced strength …
In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5 Zr (wt.%) at elevated temperatures
H Wang, CJ Boehlert, QD Wang, DD Yin… - International Journal of …, 2016 - Elsevier
The deformation modes and anisotropic behavior during the tensile deformation of peak-
aged extruded Mg-10Gd-3Y-0.5 Zr (wt.%) at 200, 250 and 300° C were investigated using in …
aged extruded Mg-10Gd-3Y-0.5 Zr (wt.%) at 200, 250 and 300° C were investigated using in …
Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP
The present work investigates the influence of different shearing patterns on mechanical and
forming behavior at room temperature of equal channel angular pressing (ECAP) processed …
forming behavior at room temperature of equal channel angular pressing (ECAP) processed …
[HTML][HTML] Microstructure, texture and mechanical properties of hot-rolled Mg–4Al–2Sn–0.5 Y–0.4 Nd alloy
J Wang, X Zhang, X Lu, Y Yang, Z Wang - Journal of Magnesium and …, 2016 - Elsevier
Abstract A new Mg–Al–Sn–RE alloy with high ductility at room temperature has been
developed. Homogenized Mg–4Al–2Sn–0.5 Y–0.4 Nd plates 25 mm in thickness were hot …
developed. Homogenized Mg–4Al–2Sn–0.5 Y–0.4 Nd plates 25 mm in thickness were hot …
[HTML][HTML] Twinning-mediated formability in Mg alloys
Mg alloys are promising candidates for automotive applications due to their low density and
high specific strength. However, their widespread applications have not been realized …
high specific strength. However, their widespread applications have not been realized …
Anisotropic deformation of extruded magnesium alloy AZ31 under uniaxial compression: A study with simultaneous in situ synchrotron x-ray imaging and diffraction
In situ synchrotron x-ray imaging and diffraction are used to investigate anisotropic
deformation of an extruded magnesium alloy AZ31 under uniaxial compression along two …
deformation of an extruded magnesium alloy AZ31 under uniaxial compression along two …