Ultralow percolation threshold and enhanced electromagnetic interference shielding in poly (L-lactide)/multi-walled carbon nanotube nanocomposites with electrically …

K Zhang, GH Li, LM Feng, N Wang, J Guo… - Journal of Materials …, 2017 - pubs.rsc.org
Electrically conductive segregated networks were built in poly (L-lactide)/multi-walled
carbon nanotube (PLLA/MWCNT) nanocomposites without sacrificing their mechanical …

Fabrication and characterization of electrospun cellulose/nano-hydroxyapatite nanofibers for bone tissue engineering

C Ao, Y Niu, X Zhang, X He, W Zhang, C Lu - International journal of …, 2017 - Elsevier
Nanofibrous scaffolds from cotton cellulose and nano-hydroxyapatite (nano-HA) were
electrospun for bone tissue engineering. The solution properties of cellulose/nano-HA …

Ultralow Percolation Threshold in Poly(l-lactide)/Poly(ε-caprolactone)/Multiwall Carbon Nanotubes Composites with a Segregated Electrically Conductive Network

YD Shi, M Lei, YF Chen, K Zhang… - The Journal of …, 2017 - ACS Publications
Improvement on the electrical property of conductive polymer composites is dependent on
the controllable dispersion of conductive additives in polymer matrices to form a conductive …

Processing and characterization of MWCNTs/epoxy nanocomposites thin films for strain sensing applications

A Bouhamed, C Müller, S Choura, O Kanoun - Sensors and Actuators A …, 2017 - Elsevier
Adjusting the process parameters is crucial to obtain nanocomposites with tailored
properties. In this paper, experimental investigations of processing parameters such as …

Mechanical and structural studies on single point incremental forming of polypropylene-MWCNTs composite sheets

LM Lozano-Sánchez, AO Sustaita, M Soto… - Journal of Materials …, 2017 - Elsevier
Polypropylene-based composites filled with different amounts of functionalized multi-wall
carbon nanotubes (f-MWCNTs) were prepared using a melt mixing process, and were …

The effect of the nanotube oxidation on the rheological and electrical properties of CNT/HDPE nanocomposites

MR Nobile, O Valentino, M Morcom… - Polymer Engineering …, 2017 - Wiley Online Library
The morphological, rheological and electrical properties of nanocomposites based on multi‐
walled carbon nanotubes (MWNTs) and high density polyethylene (HDPE), prepared by …

Polypropylene/multiwall carbon nanotubes nanocomposites: Nanoindentation, dynamic mechanical, and electrical properties

A Chafidz, WDP Rengga, R Khan… - Journal of Applied …, 2017 - Wiley Online Library
Polypropylene (PP)/Multiwall carbon nanotubes (MWCNTs) nanocomposites were
fabricated via melt compounding that utilizes a corotating twin‐screw extruder. Two …

Effect of MWCNT composition on the hardness of PP/MWCNT composites

S Bansal, N Kumar, P Jindal - Materials Today: Proceedings, 2017 - Elsevier
Polypropylene (PP) composites were fabrication with minor (5wt% and 10wt%) compositions
ofMulti-Walled Carbon Nanotubes (MWCNTs) using solvent mixing method. These …

Carbon nanotube based hybrid nanocarbon foam

MS Jamal, M Zhang - Materials Research Express, 2017 - iopscience.iop.org
Carbon nanotube (CNT) based nanocarbon foams (NFs) and the hybrid nanocarbon foams
(HNFs) are fabricated in this work. The NFs are formed by using poly (methyl methacrylate) …

[HTML][HTML] Cs/Gel/HA/MWCNTs 支架的制备及其生物相容性评价

朱智博, 关水, 王树萍, 王先犇, 刘天庆, 马学虎 - 高校化学工程学报, 2017 - xml-data.org
引入多壁碳纳米管(multi-walled carbon nanotubes, MWCNTs) 对壳聚糖/明胶/透明质酸(
chitosan/gelatin/hyaluronic acid, Cs/Gel/HA) 复合支架性能进行优化. 采用冷冻干燥法制备出 …