We present research progress made in developing copper/carbon nanotube composites
(Cu/CNT) to fulfil a growing demand for lighter copper substitutes with superior electrical …

Cold spray is a solid‐state coating deposition technology developed in the 1980s. In
comparison with conventional thermal spray processes, cold spray can retain the original …

Interface between carbon nanotubes (CNTs) and copper matrix is generally weak
mechanical bonding due to the lack of wetting and interaction between them. In the present …

In this study, a novel mixing method that combines wet mixing and conventional ball milling
followed by spark plasma sintering (SPS) was used to fabricate carbon nanotube (CNT) …

By hybridizing carbon nanotubes (CNTs) into SiC reinforced Al matrix composites, a novel
composite was fabricated to achieve excellent mechanical properties and low coefficient of …

Mono-dispersed and homogeneous carbon nanotube (CNT)/copper (Cu) composite
powders were fabricated by spraying pyrolysis (SP) method successfully. Subsequently …

Uniform dispersion of carbon nanotube (CNT) and strong interface combination between
nano‑carbon reinforcement and metal matrix are of extremely importance to fabricate …

Cu/buckypaper composites were prepared through electrodeposition of Cu onto buckypaper
from a Cu sulfate electrolyte. The oxygen-containing functional groups were introduced to …

In situ TiC particles reinforced Cu matrix composites have been prepared by melt reaction
method in this work. It is found that, during the preparation, not all the added graphite can …