Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties
MA Wahid, AN Siddiquee - Transactions of Nonferrous Metals Society of …, 2018 - Elsevier
Friction stir welding (FSW) is a solid-state welding process which is capable of joining
materials which are relatively difficult to be welded by fusion welding process. Further, this …
materials which are relatively difficult to be welded by fusion welding process. Further, this …
Special welding parameters study on Cu/Al joint in laser-heated friction stir welding
X Fei, Y Ye, L Jin, H Wang, S Lv - Journal of Materials Processing …, 2018 - Elsevier
Abstract Effects of varied pin offset on microstructure and mechanical properties of joints
were studied during laser-assisted friction stir butt welding between 6061T6 aluminum alloy …
were studied during laser-assisted friction stir butt welding between 6061T6 aluminum alloy …
Numerical simulation of friction stir butt-welding of 6061 aluminum alloy
P Zhao, Y Shen, G Huang, Q Zheng - … of Nonferrous Metals Society of China, 2018 - Elsevier
A two-dimensional computational fluid dynamics model was established to simulate the
friction stir butt-welding of 6061 aluminum alloy. The dynamic mesh method was applied in …
friction stir butt-welding of 6061 aluminum alloy. The dynamic mesh method was applied in …
Maintaining nano-lamellar microstructure in friction stir welding (FSW) of accumulative roll bonded (ARB) Cu-Nb nano-lamellar composites (NLC)
J Schneider, J Cobb, JS Carpenter, NA Mara - Journal of Materials Science …, 2018 - Elsevier
Accumulative roll bonded (ARB) Copper Niobium (Cu-Nb) nano-lamellar composite (NLC)
panels were friction stir welded (FSWed) to evaluate the ability to join panels while retaining …
panels were friction stir welded (FSWed) to evaluate the ability to join panels while retaining …
[HTML][HTML] ZL114A 合金冷态焊接微观组织与力学性能
樊振中， 万佟， 王端志， 王鲲鹏， 王胜强， 贺笃鹏 - 材料工程, 2018 - html.rhhz.net
采用扫描电镜, 能谱分析, 金相显微镜, 维氏硬度仪与WDW-100KN 万能拉伸试验机研究ZL114A
合金冷态焊接后的微观组织与力学性能, 结合SYSWELD 有限元仿真计算冷态焊接过程中的温度 …
合金冷态焊接后的微观组织与力学性能, 结合SYSWELD 有限元仿真计算冷态焊接过程中的温度 …
Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review
SP Wanare, VD Kalyankar - AIP Conference Proceedings, 2018 - pubs.aip.org
Friction stir welding is emerging as a promising technique for joining of lighter metal alloys
due to its several advantages over conventional fusion welding processes such as low …
due to its several advantages over conventional fusion welding processes such as low …