The study of static recrystallization (SRX) has been widely concerned for its importance in
regulating the microstructure and mechanical properties of deformed materials. In the paper …

The results of modeling the dynamic recrystallization of steels during hot deformation on the
basis of information on their static recrystallization kinetics are presented. The results of …

The production of steel products involves a series of manufacturing processes. The material
Thermo-Mechanical Processing (TMP) history at each process affects the final properties …

Interrupted and continuous hot compression tests were performed for eutectoid steel over
the temperature range of 850 to 1050° C and while using strain rates of 0.001, 0.01, 0.1, and …

In the direct quenching and partitioning (DQ&P) process, tough ultra-high-strength steel is
made by combining thermomechanical processing with quenching and partitioning to obtain …

Two high-strength low-alloy (HSLA) steels containing Nb-carbonitrides were produced, one
contained Mo and the other was Mo-free. The alloys were produced by simulated direct strip …

The paper presents the design and implementation of a computer system dedicated to the
optimization of a hot strip rolling process. The software system proposed here involves the …

Рассмотрены механизмы структурообразования и формирования свойств сталей при
термомеханической обработке. Описаны процессы, протекающие в аустените при …

Recrystallization kinetics of Fe-3% Si with initial grain size 296~ 839µm at the temperature
range 1223~ 1423K, strain range from 0.51 to 0.92, strain rate range 5~ 80s− 1 was studied …

Single-pass and multi-pass deformation schedules were applied over 973 K to 1323 K (700°
C to 1050° C) using a Gleeble® thermomechanical simulator to understand the effect of the …