Interface interaction and synergistic strengthening behavior in pure copper matrix composites reinforced with functionalized carbon nanotube-graphene hybrids
X Chen, J Tao, Y Liu, R Bao, F Li, C Li, J Yi - Carbon, 2019 - Elsevier
Strong interface bonding and effective load-transfer are the guarantees for developing high
strength metal matrix composites (MMCs). Herein, the effect of residual oxygen in …
strength metal matrix composites (MMCs). Herein, the effect of residual oxygen in …
Effect of CNTs content on the microstructures and properties of CNTs/Cu composite by microwave sintering
B Duan, Y Zhou, D Wang, Y Zhao - Journal of Alloys and Compounds, 2019 - Elsevier
Cu matrix composites reinforced with 0-3 wt% CNTs are fabricated via molecular-level
mixing, microwave sintering and rolling technology. A homogeneous distribution of CNTs is …
mixing, microwave sintering and rolling technology. A homogeneous distribution of CNTs is …
CNTs/Cu-Ti composites fabrication through the synergistic reinforcement of CNTs and in situ generated nano-TiC particles
N Xiong, R Bao, J Yi, D Fang, J Tao, Y Liu - Journal of Alloys and …, 2019 - Elsevier
Abstract CNTs/Cu-Ti composites were fabricated successfully by spray pyrolysis, low energy
ball milling and subsequent hot pressing (HP). Microstructure and mechanical properties of …
ball milling and subsequent hot pressing (HP). Microstructure and mechanical properties of …
Interface evolution and its influence on mechanical properties of CNTs/Cu-Ti composite
N Xiong, R Bao, J Yi, J Tao, Y Liu, D Fang - Materials Science and …, 2019 - Elsevier
Abstract Carbon Nanotubes (CNTs)/Cu-Ti composites with strong interfacial bonding were
successfully prepared by Molecular Level Mixing (MLM) combined with Spark Plasma …
successfully prepared by Molecular Level Mixing (MLM) combined with Spark Plasma …
Simultaneous achievement of high strength and high ductility in copper matrix composites with carbon nanotubes/Cu composite foams as reinforcing skeletons
C Wang, X Gan, J Tao, M Xie, J Yi, Y Liu - Nanotechnology, 2019 - iopscience.iop.org
Copper matrix composites reinforced by copper foams with uniformly embedded carbon
nanotubes (CNTs) were prepared by electrodeposition and spark plasma sintering (SPS) …
nanotubes (CNTs) were prepared by electrodeposition and spark plasma sintering (SPS) …
Optimizing the interface bonding in Cu matrix composites by using functionalized carbon nanotubes and cold rolling
G Liu, J Tao, F Li, R Bao, Y Liu, C Li… - Journal of Materials …, 2019 - cambridge.org
Nonuniform dispersion and weak interfacial bonding between carbon nanotubes (CNTs)
and Cu matrix are two critical issues for achieving high strength and good ductility of …
and Cu matrix are two critical issues for achieving high strength and good ductility of …
Interface analysis of spark plasma sintered carbon nanotube reinforced Ti6Al4V
This study investigated the dispersion and interface reactions in a multi-walled carbon
nanotube (MWCNTs) reinforced Ti6Al4V composite consolidated by the spark plasma …
nanotube (MWCNTs) reinforced Ti6Al4V composite consolidated by the spark plasma …
Fabrication of CNT/Cu based composite with twice in-situ formation from powder preparation to sintering
W Zhao, R Bao, J Yi, J Tao, Y Liu… - Materials Research …, 2019 - iopscience.iop.org
Abstract Carbon Nanotube (CNT)/copper (Cu) based composites, with improved
dispersibility of CNT in the Cu matrix and enhanced interfacial bonding between them, were …
dispersibility of CNT in the Cu matrix and enhanced interfacial bonding between them, were …