Herein, an extensive review of the design of titanium alloys with low elastic modulus as
implant materials is provided. Due to the high specific strength, low elastic modulus, fatigue …

This paper presents applications of CALPHAD (CALculation of PHAse Diagrams) modeling
in the design of organic ordered-disordered solid-state phase change materials (PCMs) for …

Lightweight sheet alloys with superior mechanical performance such as high strength,
ductility and formability at room temperature (RT) are desirable for high volume automotive …

In this study, an overcasting process followed by a low-temperature (200° C) annealing
schedule has been developed to bond magnesium to aluminum alloys. ProCAST software …

The tensile elongation of high-pressure die casting Mg-4Ce-xAl-0.5 Mn alloy was
significantly improved from 1% to 14% when the Al content was increased from 0 wt% to 3 …

Abstract Aluminum-magnesium (Al–Mg) binary system is the basis of many important Al and
Mg alloys. The thermodynamic and atomic-diffusional behaviors of Al-rich or Mg-rich alloys …

The phase composition, character of nonequilibrium solidification, structure, and
strengthening of alloys based on the Al–8% Zn–3% Mg (wt%) composition, which are …

The lightweight and flexible materials can improve people's quality of daily life; in addition,
the materials can be widely used in aerospace, automotive, consumer electronics, etc …

A brief review on the thermodynamic descriptions of all the sub-binary and ternary systems
in the Mg–Al–Zn–Sn system available in the literature was first performed, from which the …

Phase equilibria in the Mg-rich corner of Mg–Nd–Sc ternary system was studied by using the
equilibrated alloys method. The partial isothermal sections at 500 C, 530 C, and 550 C were …