Abstract Although {10 1¯ 2} twinning behavior has been extensively studied, it has rarely
been investigated under biaxial tension. In the present research, the mechanical response …

In this work, the viscoplastic self-consistent based All Twin Variant (ATV) polycrystal
modelling was employed to decipher the deformation behaviour of Mg–3Al-0.3 Mn …

Bobbin tool friction stir welding (BTFSW) technique was applied to a Mg–Zn–Zr alloy ZK60.
The results indicated that the plates were joined successfully with no welding defect forming …

Influence of texture type on mechanical properties and the evolution of microstructure and
texture is thoroughly investigated via uniaxial tension experiment along rolling direction …

In order to investigate the role of {10 1‾ 2} extension twinning in anisotropy and asymmetry of
highly textured magnesium alloy under high strain rate deformation, tensile and …

Uniaxial compression tests were conducted with strain rates in the range of 0.001–2000 s− 1
at room temperature for transverse direction (TD) of AZ31 magnesium hot-rolled sheet alloy …

Isothermal tensile tests have been performed to study the mechanical evolution of Ti-6Al-2Zr-
1Mo-1V titanium alloy under a wide temperature range from− 60℃ to 900℃ and a strain rate …

The bobbin tool friction stir welding (BTFSW) technique was applied to a Mg-Zn-Zr alloy,
ZK60-T5. The effects of shoulder diameter and stir pin geometry on the macrostructure …

The microstructure and texture evolution of as-extruded Mg-0.96 wt% Al-5.82 wt% Y
(denoted as Mg–1Al–6Y) alloy with strain at a temperature of 350° C and a strain rate of 0.1 …

In the present work, we studied the twinning-detwinning (TDT) behavior of E-form Mg alloy
(EFMA) sheets during cyclic loading-unloading via in-plane compression and in-situ tensile …