Multi-pass TIG welding was conducted on plates (15× 300× 180 mm 3) of aluminum alloy Al-
5083 that usually serves as the component material in structural applications such as …

The use of aluminum alloys to reduce weight in air, sea, and land vehicles is increasing
rapidly, especially due to their low density, excellent corrosion resistance, good forming …

Welding is a widely used manufacturing process that has a significant impact on the
sustainability dimensions represented by environmental, economic and social aspects. In …

Arc welding of high-strength aluminum alloys is economical and reliable in industry, but it is
often difficult in practice because they suffer from defects such as hot cracks and crater …

Wire arc additive manufacturing (WAAM) is a promising technology to fabricate near-net
large-scale structures with reduced cost and improved flexibility. Due to the cathode …

A computational model of metal–inert-gas arc welding, in which the arc plasma, the wire
electrode and the workpiece are included in the computational domain, is used to …

Non-dendritic equiaxed zone (EQZ) evolution and its influence on tensile properties of
tungsten inert gas (TIG) welded joint of dissimilar A6061-T6 and A6082-T6 are studied. EQZ …

Bu çalışmada alüminyum alaşımlarının kaynak bölgesinin mekanik ve mikroyapı
özelliklerine, MIG kaynak parametrelerinin etkileri incelenmiştir. Çalışmada kolay temin …

Automatic gas tungsten arc welding experiments of 5083 aluminum alloy were completed, to
analyze the weld microstructure and mechanical properties. The influences of welding …

This work presents the comparison of mechanical, fracture and fatigue crack growth
behaviour of base material and metal inert gas (MIG)-welded joints of Al-3.4 Mg alloy …