Due to lattice reorientation, grain segmentation, induced recrystallization, twins play a very
important role in regulating texture, refining grains, improving mechanical properties and …

Martensitic transformation significantly increases the strength of low-carbon steels, while it is
usually at expense of the formability and ductility. In order to further improve the mechanical …

The chemical short-range orders (CSRO) are the sub-nanosized entities inherent in high-
/medium-entropy alloys (H/MEA). To discern CSRO poses the challenge with pending …

Ultra-fine grains (UFG's) and high strength was successfully achieved in Mg–9Li alloy via
room temperature (RT) equal channel angular pressing (ECAP) and post rolling. The solid …

Here we report in-situ TEM observations on interaction between dislocations and β′
phases in aged Mg–Gd alloys. The slipping dislocations squash into the interface and bow …

Abstract Mg-7.8 Gd-2.7 Y-2.0 Ag-0.4 Zr (wt.%) alloy was prepared by traditional metal mold
gravity casting, and then was solutionized and aged. The solution and aging processing …

In this work, the microstructure and mechanical properties of the as-extruded and as-
annealed Mg-0.8 Ca-xMn-0.2 Ce (x= 0.4, 0.7) wt% alloys, which are named as XME04 and …

Heterostructured materials are an emerging class of materials with superior performances
that are unattainable by their conventional homogeneous counterparts, and have recently …

Abstract The Mg-Sn-Y alloys exhibiting advanced elevated-temperature strength up to 300℃
were newly developed by tailoring precipitates through partially substituting and increasing …

The hardness and wear resistance of cast Mg-6Gd-0.6 Zr alloy were increased by the
addition of 2 wt.% Ag. The microstructural studies of Mg-6Gd-0.6 Zr–2Ag exhibited Ag …