Due to lattice reorientation, grain segmentation, induced recrystallization, twins play a very
important role in regulating texture, refining grains, improving mechanical properties and …

Although several strategies (including grain refinement, texture adjustment, precipitation
hardening, etc.) have been verified to effectively improve the mechanical properties of …

High‐power piezoelectric applications are predicted to share approximately one‐third of the
lead‐free piezoelectric ceramic market in 2024 with alkaline niobates as the primary …

Severe plastic deformation induces numerous deformation twins in fully lamellar α+ β Ti
alloys. Interaction between deformation twins and β phase brings a strong strengthening …

The effects of aging precipitation on microstructure, deep drawing formability and tensile
properties, were investigated for Mg-6Al-1Zn (AZ61) alloy sheets. The alloy aged at 175° C …

In this work, pure Ti and Ti-5at.% Al alloy are both cold rolled, and then characterized to
observe deformation twins {10 1¯ 1}. Many two-layer steps are observed at the {10 1¯ 1} …

While precipitates have been shown to substantially strengthen magnesium alloys by
blocking the glide of dislocations inside the grain, the interactions between these …

Depending on the stress state, magnesium alloys can display tensile and/or compression
twinning. The present letter exploits bimodal textures in alloy Mg-6.5 Zn to examine how age …

Magnesium (Mg) has the lowest density of all structural metals and has excellent potential
for wide use in structural applications. While pure Mg has inferior mechanical properties; the …

In the past 100 years, precipitation strengthening has always been extremely important
pathway to resist the deformation of material due to significantly improving matrix strength …