Complex structures can now be manufactured easily utilizing AM technologies to meet the
pre-requisite objectives such as reduced part numbers, greater functionality, and lightweight …

Dynamic precipitation and recrystallization behavior during middle-temperature and
appropriate strain rates provide a chance to obtain desirable structure, which significantly …

Dynamic recrystallization (DRX) is one of the more convenient and effective means of
refining grains during hot deformation, which is closely related to the precipitation behavior …

In this study, dynamic precipitation was observed in ZK60 (Mg-6.0 Zn-0.5 Zr) alloy during low
temperature extrusion. The microstructure and mechanical properties of the alloy were …

The strength-ductility trade-off has been the most challenging problem for structural metals
for centuries. Nanoprecipitation strengthening is an ideal approach to enhance the strength …

High‐power piezoelectric applications are predicted to share approximately one‐third of the
lead‐free piezoelectric ceramic market in 2024 with alkaline niobates as the primary …

In this work, the extruded Mg-13Gd alloy sheet was fabricated by hot extrusion with small
extrusion ratio of 3.9 (ER3. 9) combined with the aging prior to extrusion (APE) treatment …

It is challenging to concurrently control the microstructure evolutions after undergoing
casting, sheet forming and welding. This study successfully addressed this challenge via …

Regulating the solute atoms to form dense nano-sized precipitates is an essential strategy to
enhance the strength of Mg alloys, wherein the maximum strength improvement is usually …

Here we report a novel Mg-4.5 Al-1.5 Sn-0.5 Ca (wt%) alloy with high mechanical properties
produced via sub-rapid solidification (SRS) and controlled rolling. In virtue of SRS combined …